Sintered Bronze Replacement Bushings For Delco-Remy Electric Starting Motors Do Not Require Machining{1453,1454,1465}
Usage:
All Caterpillar Products Equipped With Delco-Remy Electric Starting Motors
Reference: Service Magazine; May 18, 1981; Page 8; "Replacement Bushings For Delco-Remy Electric Starting Motors Must Be Machined For Correct Clearances".
Description of Change: Sintered bronze replacement bushings are available for Delco-Remy electric starting motors. Formerly, cast bushings were available. The cast bushings had to be reamed, after installation, to provide the correct clearances. The sintered bronze bearings should NOT be machined after installation; machining will destroy their lubricating ability.
Adaptable To: The chart identifies the new and former bushings. The former bushings are canceled.
Caterpillar Information System:
1991/09/23 Turbocharger Bearings Available For Garrett (Formerly AiResearch) Turbochargers Changed{1053}
1991/09/23 Self-Exciting Alternator May Not Charge After Periods Of Storage{1405,1406}
1991/09/16 New Cylinder Block And Crankshaft Used{1201,1202,1231}
1991/09/09 New Camshafts Provide Increased Power, Reduced Fuel Consumption, Reduced Exhaust Temperature, And Reduced Emissions{1210}
1991/09/02 New Flange Assembly And O-ring Seal Prevent Oil Leakage Between Magneto And Magneto Drive Housing{1552,1556}
1991/09/02 Fuel Nozzle Orifice Erosion{1254,1250}
1991/09/02 Fuel System Parts Information{1251,1264,1250}
1991/09/02 California Laws Target Excessive Smoke{1250}
1991/09/02 Service Tips For Cleaning Air-To-Air Aftercooling Systems{1063}
1991/09/02 Service Tips For Turbocharger Removal And Installation{1052}
1991/09/02 Always Use A Digital Voltmeter For Battery Testing{0785,0709,1401,7468}
1991/08/26 New Fuel Injection Lines Used On 3306B (63Z) Truck Engines {1252}
1991/09/23 New Tube Assembly Used In Exhaust Bypass Group Attachment{1057}
1991/09/23 New Piston Skirt Used In Piston Group{1214}
1991/09/23 New Pickup Assembly In Sump Pump Group Attachment Removes More Oil From Oil Pan{1324,1302}
1991/09/23 New Auxiliary Water Pump Groups Used{1371}
1991/09/30 Excessively Long Bucket And Ripper Tips May Cause Failures{6800}
1991/09/30 Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1991/09/30 "Off-Size" Bearing Kits Available For Parts Service{1052,7551}
1991/09/30 Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30 Air Filter Maintenance{1051,1054}
1991/09/30 Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30 New Piston Crown And Piston Skirt Used In Basic Piston Group; New Cooling Jet Used In Cylinder Block Group{1214,1331}
1991/10/07 Assembly Procedure For Duo-Cone Seals Changed{7561,0645}