Water Spray Pump - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | - | Loctite 242 | 1 |
- Drain the water from the water tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manualfor the correct procedure for the correct draining and filling procedures.
Show/hide table
Illustration 1 g02951677 - Disconnect hoses (3) and harness assembly (4).
- Remove bolts (1) and water spray pumps (2).
- Install water spray pump (2) in the reverse order of removal.
- Apply Tooling (A) to bolts (1).
Caterpillar Information System:
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Water Spray Lines
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Hydraulic Oil Cooler Lines Group
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Fuel Tank
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Fuel Tank and Mounting
R1600H Load Haul Dump Steering System Pressure Reducing Valve (Pilot Oil)
R3000H Load Haul Dump Hydraulic System Sequence Valve (Float) - Test and Adjust
R3000H Load Haul Dump Braking System Brake Release System Air - Purge
2012/03/21 Improved Rotary Position Sensor Is Now Used for PM-201 Cold Planers {1408}
VIMS 3G Third-Party Wireless Radio Interfacing for Certain CAT Products {7601, 7606} VIMS 3G Third-Party Wireless Radio Interfacing for Certain CAT Products {7601, 7606}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205} Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201} Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205} Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201} Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201}
Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281} Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281}
Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281} Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281}
Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284} Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284}
Thermal Spray Procedures for Off-Highway Truck Final Drive Planet Gear{4084} Thermal Spray Procedures for Off-Highway Truck Final Drive Planet Gear{4084}
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems General Information (Vibratory System)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Operator Controls (Vibratory System)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Pump (Vibratory)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Motor (Vibratory)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Eccentric Weight
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Electrical Schematic (Vibratory System)
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260} Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}