Fuel Tank
Show/hide table
 | |
| Illustration 1 | g02964396 |
Show/hide table
| Specification for 390-9282 Fuel Tank Gp | |||
| Item | Qty | Part | Specification description |
| Inside surfaces should be free from paint and coated with green 1P-0808 Multipurpose Grease. | |||
| 1 | 1 | 272-0021 Fuel Level Sender As | Operating Voltage is 12 VDC or 24 VDC. |
| Resistance when the float is in EMPTY is 240 to 250 Ohms. | |||
| Resistance when the float is in FULL is 28 to 33 Ohms. | |||
| 2 | 5 | 7I-2273 Bolt | Before assembly, apply blue Loctite 242 to the threads. |
| Tighten the bolts in the start pattern to 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in). |
|||
Caterpillar Information System:
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Fuel Tank and Mounting
R1600H Load Haul Dump Steering System Pressure Reducing Valve (Pilot Oil)
R3000H Load Haul Dump Hydraulic System Sequence Valve (Float) - Test and Adjust
R3000H Load Haul Dump Braking System Brake Release System Air - Purge
2012/03/21 Improved Rotary Position Sensor Is Now Used for PM-201 Cold Planers {1408}
VIMS 3G Third-Party Wireless Radio Interfacing for Certain CAT Products {7601, 7606} VIMS 3G Third-Party Wireless Radio Interfacing for Certain CAT Products {7601, 7606}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205} Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201} Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205} Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162} Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256} Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160} Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Hydraulic Oil Cooler Lines Group
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Water Spray Lines
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Water Spray Pump - Remove and Install
Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201} Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201}
Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281} Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281}
Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281} Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281}
Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284} Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284}
Thermal Spray Procedures for Off-Highway Truck Final Drive Planet Gear{4084} Thermal Spray Procedures for Off-Highway Truck Final Drive Planet Gear{4084}
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems General Information (Vibratory System)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Operator Controls (Vibratory System)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Pump (Vibratory)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Motor (Vibratory)