Improved Rotary Position Sensor Is Now Used for PM-201 Cold Planers {1408}
- Cold Planer:
- PM-201 (S/N: PNM1-UP)
Description of Change: Improved Rotary Position Sensor is now used for PM-201 Cold Planers. The improved Rotary Position Sensor eliminates the issue of intermittent incorrect signal.
Adaptable To: The improved Rotary Position Sensor part number is listed in Table 1.
Show/hide table
| Improved Rotary Position Sensor | |||
|---|---|---|---|
| Item | New Part Number | Part Name | Former Part Number |
| 1 | 266-1478 | Position Sensor Gp | 214-4863 |
| 2 | 2K-8199 | O-Ring Seal | |
The improved Rotary Position Sensor is effective in production with the Cold Planers: PM-201 (S/N: PNM290-UP)
Caterpillar Information System:
VIMS 3G Third-Party Wireless Radio Interfacing for Certain CAT Products {7601, 7606} VIMS 3G Third-Party Wireless Radio Interfacing for Certain CAT Products {7601, 7606}
Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205} Thermal Spray Procedures for OHT Front Spindles {0679, 4006, 4205}
Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201} Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}
Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205} Thermal Spray Procedures for OHT Rear Spindles {0599, 0679, 4006, 4205}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162} Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256} Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160} Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215} Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 2987 - FMI 04
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 2987 - FMI 03
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050} Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
826K Landfill Compactor Engine Air Precleaner - Clean
R3000H Load Haul Dump Braking System Brake Release System Air - Purge
R3000H Load Haul Dump Hydraulic System Sequence Valve (Float) - Test and Adjust
R1600H Load Haul Dump Steering System Pressure Reducing Valve (Pilot Oil)
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Fuel Tank and Mounting
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Fuel Tank
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Hydraulic Oil Cooler Lines Group
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Water Spray Lines
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Water Spray Pump - Remove and Install
Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201} Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201}
Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281} Thermal Spray Procedures for OHT Differential Housing - Housing and Side Thrust {0374, 0599, 0679, 3258, 3281}
Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281} Thermal Spray Procedures for OHT Cage - Bearing{0679, 3258, 3281}
Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284} Thermal Spray Procedures for OHT Differential Carrier Assembly {0374, 0599, 0679, 3258, 3281, 3284}