C4.4 Industrial Engine Caterpillar


Fuel Filter Base - Single Secondary Fuel Filter Base

Usage:

C4.4 448


NOTICE

Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


If necessary, install a new fuel filter (2) to canister (1). Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace" for the correct procedure.



Illustration 1g02484376
Typical example

(3) Tighten the bolts to the following torque. ... 44 N·m (33 lb ft)

(4) Tighten the bolt to the following torque. ... 17 N·m (13 lb ft)

Caterpillar Information System:

541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Hood Tilt Pump and Motor - Remove and Install
725C2 Articulated Truck Camera
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Hood Tilt Cylinder - Remove and Install
Contour Series Seat Troubleshooting Chart
Comfort Series Seat For Caterpillar Machines Optimized Seat Controls
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Engine - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Machine Preheater - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Muffler - Remove and Install
PM-200 Cold Planer Machine Systems Track Roller - Assemble
PM-200 Cold Planer Machine Systems Track Roller - Disassemble
PM-200 Cold Planer Machine Systems Track Roller - Install
2011/04/01 A Troubleshooting Procedure Is Available for Implement Check and Relief Valve Group on Certain M and M Series 2 Motor Graders {4300, 5050}
2011/04/19 Updated Demand Fan Recalibration Information Available for Landfill Compactor, Wheel Dozer, and Wheel Loader Machines {1386, 1387}
SC-57 Felling Head Felling Head Piston Motor (Disc Saw)
924K, 930K and 938K Wheel Loaders Drive Shaft Spline - Lubricate - If Equipped
Field Installation of the 364-1356 Quick Coupler Conversion Kit (Hydraulic){6129} Field Installation of the 364-1356 Quick Coupler Conversion Kit (Hydraulic){6129}
2011/05/20 New Fuel Water Separator Bowls are Now Used on Certain Caterpillar Equipment {1261, 1263}
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Exhaust Elbow - Remove and Install
2011/03/29 New Water Temperature Regulator for C6.6 and C4.4 Machine Engines {1355, 1380, 1393}
14M and 16M Motor Graders Braking and Hydraulic Fan System Oil Cooler (Brake, Hydraulic Fan) - 14M
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Oil Filter (Rear Axle Lubrication)
584 and 584HD Forwarders Expandable Pin - Tighten
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.