924K, 930K and 938K Wheel Loaders Caterpillar


Drive Shaft Spline - Lubricate - If Equipped

Usage:

930K DYB
Törölje le a zsírzófejet, mielőtt azt megkenné.


FIGYELMEZTETÉS

Mielőtt a bordáskötést megkenné, teljesen fordítsa el a gépet balra, vagy jobbra, hogy a tömítés ne sérüljön meg.


  1. Indítsa be a motort. Emelje fel a kanalat. Engedje ki a rögzítőféket. Teljesen fordítsa el a gépet balra vagy jobbra.

  2. Engedje le a kanalat a talajra. Kapcsolja be a rögzítőféket. Állítsa le a motort.

  3. Vigye fel a kenőanyagot arra a zsírzófejre, mely féltengely hornyán van.

  4. Indítsa be a motort. Emelje fel a kanalat. Engedje ki a rögzítőféket. Fordítsa el a gépet addig, amíg a gép egyenesen nem áll.

  5. Engedje le a kanalat addig, amíg a kanál enyhe lefelé irányuló nyomást nem gyakorol a földre. Állítsa le a motort. Kapcsolja be a rögzítőféket.

Caterpillar Information System:

SC-57 Felling Head Felling Head Piston Motor (Disc Saw)
2011/04/19 Updated Demand Fan Recalibration Information Available for Landfill Compactor, Wheel Dozer, and Wheel Loader Machines {1386, 1387}
2011/04/01 A Troubleshooting Procedure Is Available for Implement Check and Relief Valve Group on Certain M and M Series 2 Motor Graders {4300, 5050}
C4.4 Industrial Engine Fuel Filter Base - Single Secondary Fuel Filter Base
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Hood Tilt Pump and Motor - Remove and Install
725C2 Articulated Truck Camera
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Hood Tilt Cylinder - Remove and Install
Contour Series Seat Troubleshooting Chart
Comfort Series Seat For Caterpillar Machines Optimized Seat Controls
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Engine - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Machine Preheater - Remove and Install
541 Series 2 and 552 Series 2 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install
Field Installation of the 364-1356 Quick Coupler Conversion Kit (Hydraulic){6129} Field Installation of the 364-1356 Quick Coupler Conversion Kit (Hydraulic){6129}
2011/05/20 New Fuel Water Separator Bowls are Now Used on Certain Caterpillar Equipment {1261, 1263}
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Exhaust Elbow - Remove and Install
2011/03/29 New Water Temperature Regulator for C6.6 and C4.4 Machine Engines {1355, 1380, 1393}
14M and 16M Motor Graders Braking and Hydraulic Fan System Oil Cooler (Brake, Hydraulic Fan) - 14M
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Oil Filter (Rear Axle Lubrication)
584 and 584HD Forwarders Expandable Pin - Tighten
793F and 793F CMD Off-Highway Truck Power Train Water Lines (Oil Coolers) - If Equipped
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Electric Drive Pump (Secondary Steering) - Check
980M Tier 4 and 982M Tier 4 Wheel Loaders Inlet Manifold - Remove and Install - Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
2014/05/02 New Accessory Drives and Alternator Mounting for 793D and 797B Engines {1154, 1207, 1405, 1405}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.