770G and 772G Off-Highway Truck Caterpillar


Capacities (Refill)

Usage:

770G ECM


PERHATIAN

Jika suhu lingkungan saat engine mulai distart atau selama pengoperasian ada dibawah −10 °C (14 °F), lakukan prosedur dalam Buku Petunjuk Pengoperasian dan Perawatan, "Pemanasan Engine dan Alat Berat". Periksa kompartemen diferensial dan kompartemen final drive untuk tinggi permukaan fluida yang benar. Lalai melakukan pemanasan oli atau tingkat pelumasan yang tidak benar sebelum pengoperasian akan menyebabkan kerusakan pada alat berat.


Kapasitas pengisian ulang akan berbeda-beda bergantung pada prosedur servis dan kondisi yang ada.

Catatan: Amati semua meteran pengamat dan indikator tingkat cairan untuk memastikan bahwa sistem dan/atau kompartemen telah diisi ulang sesuai tingkat cairan yang benar.

770G

(C15)

Tabel 1
Kompartemen atau Sistem  Liter  Galon AS  Galon Inggris 
Oli Engine dengan Filter  40  10,6  8,8 
Antifreeze/Cairan Pendingin (Sistem Penuh)  132  34,8  29 

772G

(C18)

Tabel 2
Kompartemen atau Sistem  Liter  Galon AS  Galon Inggris 
Oli Engine dengan Filter  66  17,4  14,5 
Antifreeze/Cairan Pendingin (Sistem Penuh)  125  33  27,5 

770G dan 772G

Tabel 3
Kompartemen atau Sistem  Liter  Galon AS  Galon Inggris 
Sistem Transmisi dan Konverter Torsi  95  25  21 
Hanya Wadah Konverter Torsi  49  13  10,8 
Alat Pengangkat dan Tangki Hidrolik Rem dengan Filter  178  47  39,2 
Sistem Hidrolik Kemudi dengan Filter  68  18  15 
Masing-Masing Roda Depan  2,5  0,66  0,55 
Diferensial  114  30  25 
Masing-Masing Final Drive  22,5 
Tangki Bahan Bakar  530  140  116,6 
Masing-Masing Strut Depan  11,6  3,1  2,6 
Masing-Masing Strut Belakang  9,2  2,4 
Botol Washer Jendela  3,8  0,8 

Caterpillar Information System:

Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050} Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051} Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051}
Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051} Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159} "White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
770G and 772G Off-Highway Truck Engine Starting with Auxiliary Start Receptacle
3406C Industrial Engine Reference Information
587T Pipelayer Hydraulic System Location of Components (Fan System)
C15 and C18 Tier 4 Final Engines Water Temperature Regulator - Test
450E Backhoe Loader Hydraulic and Steering System Accumulator
2010/11/08 Improved Housing on Steering Control Group for the 583T Pipelayer {3033}
2010/12/16 A New Exhaust Plug Is Used on Certain C18 Engines {1058, 1061}
770G and 772G Off-Highway Truck Engine Starting with Jump Start Cables
Installing the 350-9038 Air Conditioner and Heater Installation Kit (Conversion){1802, 1805, 1808, 7174, 7304, 7320, 734D} Installing the 350-9038 Air Conditioner and Heater Installation Kit (Conversion){1802, 1805, 1808, 7174, 7304, 7320, 734D}
992K Wheel Loader Electrohydraulic System Pressure Sensor (Lift Cylinder Head End Oil)
Realignment of The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks{1802} Realignment of The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks{1802}
2010/11/08 A New Procedure is Used to Align The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks {1802}
C9.3 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - Control Module, Clean Emissions Module
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 2223 - FMI 13
2010/12/02 A New Torque Is Now Used for Tightening the Plug Assembly for Front Gear Group on Certain Motor Graders {4053}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 2224 - FMI 13
770G and 772G Off-Highway Truck Engine Exhaust (Diverter) - If Equipped
793F Series AC Off-Highway Truck/Tractor Power Train Electronic Control System General Information
2010/11/16 A New Oil Pan Gasket is Now Used on 793F Off-Highway Truck Engines {1302, 7555}
Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor {5721, 5910, 7620} Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor {5721, 5910, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.