Air Control Valve - Remove and Install - Control Module, Clean Emissions Module
拆卸步骤
- 拆下管组件 (1) ，然后断开线束组件 (4) 。
Show/hide table
 | |
| 图 1 | g02327953 |
- 拆下螺栓 (3) ，然后拆下控制模块 (2) 。
安装步骤
- 按照相反顺序安装控制模块 (2) 。
Caterpillar Information System:
2010/11/08 A New Procedure is Used to Align The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks {1802}
Realignment of The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks{1802} Realignment of The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks{1802}
992K Wheel Loader Electrohydraulic System Pressure Sensor (Lift Cylinder Head End Oil)
Installing the 350-9038 Air Conditioner and Heater Installation Kit (Conversion){1802, 1805, 1808, 7174, 7304, 7320, 734D} Installing the 350-9038 Air Conditioner and Heater Installation Kit (Conversion){1802, 1805, 1808, 7174, 7304, 7320, 734D}
770G and 772G Off-Highway Truck Capacities (Refill)
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050} Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051} Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051}
Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051} Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159} "White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
770G and 772G Off-Highway Truck Engine Starting with Auxiliary Start Receptacle
3406C Industrial Engine Reference Information
587T Pipelayer Hydraulic System Location of Components (Fan System)
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 2223 - FMI 13
2010/12/02 A New Torque Is Now Used for Tightening the Plug Assembly for Front Gear Group on Certain Motor Graders {4053}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 2224 - FMI 13
770G and 772G Off-Highway Truck Engine Exhaust (Diverter) - If Equipped
793F Series AC Off-Highway Truck/Tractor Power Train Electronic Control System General Information
2010/11/16 A New Oil Pan Gasket is Now Used on 793F Off-Highway Truck Engines {1302, 7555}
Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor {5721, 5910, 7620} Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor {5721, 5910, 7620}
2010/11/22 A Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor is Now Available {5721, 5910, 7620}
793F Series AC Off-Highway Truck/Tractor Power Train Electronic Control System Electric Power Generation
793F Series AC Off-Highway Truck/Tractor Power Train Electronic Control System Electric Drive System
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Engine Oil Cooler - Remove
795F AC and 795F AC XQ Off-Highway Truck Engine Supplement Engine Oil Cooler - Install