Pressure Sensor (Lift Cylinder Head End Oil)
Show/hide table
| |
| Illustration 1 | g06216968 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | - | - | Final installation torque to |
| - | - | - | Supply voltage is 7 to 14 VDC.
Output type is PWM. Output frequency is 500 ± 100 Hz. Duty cycle is 3 to 97%. |
Caterpillar Information System:
Installing the 350-9038 Air Conditioner and Heater Installation Kit (Conversion){1802, 1805, 1808, 7174, 7304, 7320, 734D} Installing the 350-9038 Air Conditioner and Heater Installation Kit (Conversion){1802, 1805, 1808, 7174, 7304, 7320, 734D}
770G and 772G Off-Highway Truck Capacities (Refill)
Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050} Transmission, Torque Converter, and Final Drive Updates for 768C through 793C Off-Highway Trucks{3001, 3030, 4050}
Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051} Reusability of Rear Final Drive Splines on 769 to 784 Off-Highway Trucks{3259, 4050, 4051}
Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051} Salvage and Reuse of Final Drive Axle Bearings Used in Off-Highway Trucks/ Tractors and 990 to 994 Wheel Loaders {4050, 4051}
"White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159} "White Layer Flaking" of Transfer Gears in Off-Highway Trucks and Tractors{3159}
770G and 772G Off-Highway Truck Engine Starting with Auxiliary Start Receptacle
3406C Industrial Engine Reference Information
587T Pipelayer Hydraulic System Location of Components (Fan System)
C15 and C18 Tier 4 Final Engines Water Temperature Regulator - Test
450E Backhoe Loader Hydraulic and Steering System Accumulator
2010/11/08 Improved Housing on Steering Control Group for the 583T Pipelayer {3033}
Realignment of The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks{1802} Realignment of The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks{1802}
2010/11/08 A New Procedure is Used to Align The Air Conditioner Compressor Pulley on 793F, 795F and 797F Off-Highway Trucks {1802}
C9.3 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - Control Module, Clean Emissions Module
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 2223 - FMI 13
2010/12/02 A New Torque Is Now Used for Tightening the Plug Assembly for Front Gear Group on Certain Motor Graders {4053}
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System MID 082 - CID 2224 - FMI 13
770G and 772G Off-Highway Truck Engine Exhaust (Diverter) - If Equipped
793F Series AC Off-Highway Truck/Tractor Power Train Electronic Control System General Information
2010/11/16 A New Oil Pan Gasket is Now Used on 793F Off-Highway Truck Engines {1302, 7555}
Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor {5721, 5910, 7620} Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor {5721, 5910, 7620}
2010/11/22 A Procedure to Replace Software and Calibrate the Maximum Propel Speed for CD54 Vibratory Asphalt Compactor is Now Available {5721, 5910, 7620}
793F Series AC Off-Highway Truck/Tractor Power Train Electronic Control System Electric Power Generation