584 and 584HD Forwarders Caterpillar


Bogie Oil Sample - Obtain

Usage:

584HD 109

  • Operate the machine for a few minutes before you obtain the fluid sample. This will thoroughly mix the fluid for a more accurate sample.

    Note: The bogies are not equipped with sampling valves. Obtaining a sample of the oil will require a vacuum pump or an equivalent.




      Illustration 1g01897773

    1. Withdraw the oil through the oil level hole (1) of each bogie.

    ReferenceFor more information, refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" and Special Publication, PEHP6001, "How To Take A Good Oil Sample".

  • Caterpillar Information System:

    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 14
    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 09
    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 02
    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1963 - FMI 06
    795F AC and 795F AC XQ Off-Highway Trucks Final Drive Oil Filter - Replace
    Additional Spare Pins and Center Lock Clamping Spacers{6129} Additional Spare Pins and Center Lock Clamping Spacers{6129}
    422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Engine - Install
    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1963 - FMI 05
    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1963 - FMI 03
    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1962 - FMI 08
    584 and 584HD Forwarders Bogie Oil Level - Check
    793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1962 - FMI 04
    2009/05/18 New Pilot Valves are Available {5059, 5705}
    Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857} Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
    584 and 584HD Forwarders Hydraulic System Load Sensing Signal System
    C13 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
    793F and 797F Off-Highway Trucks Braking System Brakes Overheat
    PM200 Cold Planer C18 Engine Supplement Muffler - Remove and Install
    797B Off-Highway Truck Power Train Control Valve (Final Drive Diverter)
    797B Off-Highway Truck Power Train Oil Filter (Final Drive)
    797B Off-Highway Truck Power Train Oil Filter (Differential)
    C13 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
    584 and 584HD Forwarders Bogie Pivot Bearings - Lubricate
    2009/05/04 A New Suspension Cylinder Charging Procedure is Available for Certain Off-Highway Trucks {0756, 7200, 7201, 7201, 7201, 7213, 7213}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.