A New Suspension Cylinder Charging Procedure is Available for Certain Off-Highway Trucks {0756, 7200, 7201, 7201, 7201, 7213, 7213}
- Off-Highway Truck:
- 770 (S/N: BZZ1-UP)
- Quarry Truck:
- 775F (S/N: DLS1-UP)
- Off-Highway Truck:
- 773F (S/N: EXD1-UP)
- 772 (S/N: RLB1-UP)
- 773F (S/N: EED1-UP)
- 777F (S/N: JRP1-UP)
- 777F (S/N: JXP1-UP)
ReferenceSpecial Instruction, REHS4445, "Servicing the Suspension Cylinders for Off-Highway Trucks"
A new procedure for purging the oil and nitrogen from the suspension cylinders is now available. The new procedure also contains an incremental charging procedure for the oil and nitrogen that is used in the suspension cylinders.
The new procedure will describe the process for purging the oil and nitrogen in the suspension cylinders, and charging the oil and nitrogen in the suspension cylinders.
Show/hide table
| NOTICE |
|---|
Upon delivery, the suspension cylinders need to be completely purged and charged on all new Off-Highway Trucks. Therefore, it is extremely important to utilize the new procedure during predelivery setup of a new machine. |
Caterpillar Information System:
584 and 584HD Forwarders Bogie Pivot Bearings - Lubricate
C13 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
797B Off-Highway Truck Power Train Oil Filter (Differential)
797B Off-Highway Truck Power Train Oil Filter (Final Drive)
797B Off-Highway Truck Power Train Control Valve (Final Drive Diverter)
PM200 Cold Planer C18 Engine Supplement Muffler - Remove and Install
793F and 797F Off-Highway Trucks Braking System Brakes Overheat
C13 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
584 and 584HD Forwarders Hydraulic System Load Sensing Signal System
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857} Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
2009/05/18 New Pilot Valves are Available {5059, 5705}
584 and 584HD Forwarders Bogie Oil Sample - Obtain
584 and 584HD Forwarders Bogie Oil - Change
PM-200 Cold Planer Machine Systems Conveyor Pulley (Tail, First Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Belt (First Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Belt (Second Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Pulley (Head, Second Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Pulley (Tail, Second Stage) - Remove and Install
PM200 Cold Planer C18 Engine Supplement System Pressure - Release
C15 and C18 Industrial Engines Nozzle Heater Harness - Remove and Install
584 and 584HD Forwarders Cab Air Filter - Clean/Replace
584 and 584HD Forwarders Power Train Final Drive
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 0836 - FMI 04