Bogie Pivot Bearings - Lubricate
Show/hide table
 | |
| Illustration 1 | g01899253 |
- Remove the plastic caps from grease fittings (1). Do not discard the plastic caps.
- Wipe off all of the fittings before any lubricant is applied. This includes vent ports (2) .
- Apply 1P-0808 Multipurpose Grease through the grease fittings around the circumference of each bogie pivot.
- Reinstall the plastic caps.
Caterpillar Information System:
C13 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
797B Off-Highway Truck Power Train Oil Filter (Differential)
797B Off-Highway Truck Power Train Oil Filter (Final Drive)
797B Off-Highway Truck Power Train Control Valve (Final Drive Diverter)
PM200 Cold Planer C18 Engine Supplement Muffler - Remove and Install
793F and 797F Off-Highway Trucks Braking System Brakes Overheat
C13 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
584 and 584HD Forwarders Hydraulic System Load Sensing Signal System
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857} Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
2009/05/18 New Pilot Valves are Available {5059, 5705}
584 and 584HD Forwarders Bogie Oil Sample - Obtain
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2448 - FMI 14
2009/05/04 A New Suspension Cylinder Charging Procedure is Available for Certain Off-Highway Trucks {0756, 7200, 7201, 7201, 7201, 7213, 7213}
584 and 584HD Forwarders Bogie Oil - Change
PM-200 Cold Planer Machine Systems Conveyor Pulley (Tail, First Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Belt (First Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Belt (Second Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Pulley (Head, Second Stage) - Remove and Install
PM-200 Cold Planer Machine Systems Conveyor Pulley (Tail, Second Stage) - Remove and Install
PM200 Cold Planer C18 Engine Supplement System Pressure - Release
C15 and C18 Industrial Engines Nozzle Heater Harness - Remove and Install
584 and 584HD Forwarders Cab Air Filter - Clean/Replace
584 and 584HD Forwarders Power Train Final Drive