Install Both the 340-4329 Fan Guard and the 340-4325 Fan Support At the Same Time{1356, 1360}
- Pipelayer:
- PL61 (S/N: WGS1-170)
- Track-Type Tractor:
- D6K (S/N: DHA1-1080; NCF1-43; FBH1-1407)
Introduction
This Special Instruction provides the parts list and a brief description of the orientation for the parts.
Note: If a failure or damage occurs to either part to the machines that are listed above, both parts must be changed.
Required Parts
Show/hide table
| Required Parts | |||
| Item | Part Number | Description | Quantity |
| 1 | 340-4325 | Fan Support | 1 |
| 2 | 340-4329 | Fan Guard | 1 |
Show/hide table
 | |
| Illustration 1 | g01838614 |
Show/hide table
 | |
| Illustration 2 | g01838653 |
The clearance between the tips of the fan and fan guard (2) has been increased in order to prevent any chance of contact. In order to increase the clearance between the tip on the fan and the guard, changes were made to both fan guard (2) and fan support (1) .
Caterpillar Information System:
2009/03/09 An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
2009/07/13 New Hoses Are Now Used On Some Medium Wheel Loaders {4304}
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139} Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
CB-214E, CB-224E and CB-225E Paving Compactors Maintenance Interval Schedule
793F and 793F CMD Off-Highway Truck Automatic Lubrication System General Information
Motor Grader Circle Pinion Reuse {5207} Motor Grader Circle Pinion Reuse {5207}
2009/03/02 Clarification to The Assembly Procedure for 120M, 140M, and 160M Front Gear Groups on All Wheel Drive Machines {4053, 4205, 4208, 4350, 4351, 4355}
795F AC and 795F AC XQ Off-Highway Truck Power Train Final Drive Oil Cooler
CD54 Vibratory Compactor Machine Systems Operator Platform
CD54 Vibratory Compactor Machine Systems Hydraulic Cylinder (Steering)
C4.4 Industrial Engine Idler Gear - Install
C4.4 Industrial Engine Idler Gear - Install
AccuGrade® GPS v11 for CD700 Electrical Power Supply (Light Bar)
584 and 584HD Forwarders Fuel System - Prime
584 and 584HD Forwarders Fuel System Secondary Filter - Replace
2009/08/03 The Differential and Bevel Gear Group is Updated {3256, 3258}
12M Motor Grader Machine Systems System Pressure - Release
584 and 584HD Forwarders Fuel System Water Separator - Drain
CD54 Paving Compactor System Schematic
2010/04/29 The New Hose Routing Improves the Durability of the Hydraulic Load Sensing Signal Line and Drain Line {5057}
2009/09/30 An Improved Breaker Valve on the Hydraulic Tank Increases Reliability {5056, 5057}
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 169 - CID 2789 - FMI 03
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 169 - CID 2789 - FMI 04
MINEGEM Machine Control ; Guidance Products Local Area Radio Network Local Area Radio Network Troubleshooting