Hydraulic Cylinder (Steering)
Show/hide table
 | |
| Illustration 1 | g01716696 |
Operating pressure ... 23000 kPa (3336 psi)
Stroke ... 205 ± 5 mm (8.1 ± 0.2 inch)
(A) Bore of the hydraulic cylinder group ... 80 mm (3.1 inch)
(B) Diameter of the rod ... 40 mm (1.6 inch)
(C) Length of the rod
- Retracted length ... 465.0 ± 1.5 mm (18.31 ± 0.06 inch)
- Extended length ... 670 mm (26.4 inch)
Caterpillar Information System:
C4.4 Industrial Engine Idler Gear - Install
C4.4 Industrial Engine Idler Gear - Install
CD54 Vibratory Compactor Machine Systems Rollover Protective Structure (ROPS)
C4.4 Industrial Engine Idler Gear - Remove
C4.4 Industrial Engine Idler Gear - Remove
CD54 Vibratory Compactor Machine Systems Piston Motor (Vibratory)
CD54 Vibratory Compactor Machine Systems Gear Motor (Fan Drive)
MINEGEM Machine Control ; Guidance Products Machine Automation System Visual Inspection
MINEGEM Machine Control ; Guidance Products Local Area Radio Network Visual Inspection
2009/03/23 Installation Procedure for the Brake Group Seal Assemblies {4251, 4267}
MINEGEM Machine Control ; Guidance Products Area Isolation System Area Isolation System Troubleshooting
MINEGEM Machine Control ; Guidance Products Area Isolation System Visual Inspection
CD54 Vibratory Compactor Machine Systems Operator Platform
795F AC and 795F AC XQ Off-Highway Truck Power Train Final Drive Oil Cooler
2009/03/02 Clarification to The Assembly Procedure for 120M, 140M, and 160M Front Gear Groups on All Wheel Drive Machines {4053, 4205, 4208, 4350, 4351, 4355}
Motor Grader Circle Pinion Reuse {5207} Motor Grader Circle Pinion Reuse {5207}
793F and 793F CMD Off-Highway Truck Automatic Lubrication System General Information
CB-214E, CB-224E and CB-225E Paving Compactors Maintenance Interval Schedule
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139} Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
2009/07/13 New Hoses Are Now Used On Some Medium Wheel Loaders {4304}
2009/03/09 An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
Install Both the 340-4329 Fan Guard and the 340-4325 Fan Support At the Same Time{1356, 1360} Install Both the 340-4329 Fan Guard and the 340-4325 Fan Support At the Same Time{1356, 1360}
AccuGrade® GPS v11 for CD700 Electrical Power Supply (Light Bar)
584 and 584HD Forwarders Fuel System - Prime