CD54 Vibratory Compactor Machine Systems Caterpillar


Rollover Protective Structure (ROPS)

Usage:

CD-54 J5R



Illustration 1g01836353

(1) Apply Loctite 498 to two trim channels.

(2) Torque for two bolts ... 450 ± 25 N·m (332 ± 18 lb ft)

Caterpillar Information System:

C4.4 Industrial Engine Idler Gear - Remove
C4.4 Industrial Engine Idler Gear - Remove
CD54 Vibratory Compactor Machine Systems Piston Motor (Vibratory)
CD54 Vibratory Compactor Machine Systems Gear Motor (Fan Drive)
MINEGEM Machine Control ; Guidance Products Machine Automation System Visual Inspection
MINEGEM Machine Control ; Guidance Products Local Area Radio Network Visual Inspection
2009/03/23 Installation Procedure for the Brake Group Seal Assemblies {4251, 4267}
MINEGEM Machine Control ; Guidance Products Area Isolation System Area Isolation System Troubleshooting
MINEGEM Machine Control ; Guidance Products Area Isolation System Visual Inspection
795F AC and 795F AC XQ Off-Highway Trucks Fuses, Circuit Breakers and Relays - Replace/Reset
2009/03/23 Correction to Disassembly and Assembly , "Service Brake - Disassemble" {4251}
Applying Grease to the Hoist Cylinder Bearings{5102} Applying Grease to the Hoist Cylinder Bearings{5102}
C4.4 Industrial Engine Idler Gear - Install
C4.4 Industrial Engine Idler Gear - Install
CD54 Vibratory Compactor Machine Systems Hydraulic Cylinder (Steering)
CD54 Vibratory Compactor Machine Systems Operator Platform
795F AC and 795F AC XQ Off-Highway Truck Power Train Final Drive Oil Cooler
2009/03/02 Clarification to The Assembly Procedure for 120M, 140M, and 160M Front Gear Groups on All Wheel Drive Machines {4053, 4205, 4208, 4350, 4351, 4355}
Motor Grader Circle Pinion Reuse {5207} Motor Grader Circle Pinion Reuse {5207}
793F and 793F CMD Off-Highway Truck Automatic Lubrication System General Information
CB-214E, CB-224E and CB-225E Paving Compactors Maintenance Interval Schedule
Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139} Bench Test Procedure for a 120H, 12H, 12K, 135H, 140H, 140K, 143H, 160H, 160K, and 163H Motor Grader Transmission{3030, 3073, 3139}
2009/07/13 New Hoses Are Now Used On Some Medium Wheel Loaders {4304}
2009/03/09 An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.