1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i03348082

416E Backhoe Loader Caterpillar


Leaving the Machine

Usage:

416E BWC

  • Lower all work tools to the ground.

  • Turn the engine start switch key to the OFF position.

  • Move all hydraulic control levers and pedals back and forth in order to relieve hydraulic pressure.

  • Move all hydraulic control levers into the HOLD position.

  • Remove the engine start switch key.

    This will prevent unauthorized persons from starting the engine or from turning on the lights.

  • When you exit the machine, close the windows and lock the cab doors, if equipped.

  • Install all vandalism protection locks and all vandalism covers, if equipped.
    Show/hide table
    Illustration 1g00037860

  • Use the steps and the handholds when you get off the machine. Face the machine and use both hands. Make sure that the steps are clear of debris before you dismount.

  • Ensure that all lights are shut off.

    • Caterpillar Information System:

    12K, 140K, 140K Series 2 and 160K Motor Graders Hydraulic and Steering System Steering System
    416E Backhoe Loader Stabilizer Control
    416E Backhoe Loader Backup Alarm
    2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
    416E Backhoe Loader Plate Locations and Film Locations
    416E Backhoe Loader Safety Messages
    2009/03/02 Update to the Testing and Adjusting , "Limit Switch (Stop Light) - Adjust" {1432, 1435, 4269}
    785D Off-Highway Truck/Tractor Engine Supplement Engine and Torque Converter - Separate and Connect
    785D Off-Highway Truck/Tractor Engine Supplement Engine and Torque Converter - Install
    785D Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove
    Bench Test Procedure for a 793C Off-Highway Truck Transmission{3030, 3073} Bench Test Procedure for a 793C Off-Highway Truck Transmission{3030, 3073}
    2008/11/24 New Primary Fuel Filter {1258, 1261, 1263}
    416E Backhoe Loader Shipping the Machine
    797B Off-Highway Truck Mirror
    2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
    2008/11/01 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
    416E Backhoe Loader Lift Cylinder Brace - Connect and Disconnect
    416E Backhoe Loader Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
    14H and 16H Motor Graders Hydraulic and Steering System Pump Efficiency (Gear Pumps) - Test
    EquipmentManager Dealer Administrator Manual Active Fleet
    R1700G Load Haul Dump Circuit Breakers - Reset
    R2900G Load Haul Dump Circuit Breakers - Reset
    2009/02/23 New Oil Pump {1151, 1162, 1206}
    CB54, CB54 XW and CB64 Vibratory Compactor Propel System Brake Pump
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.