| |
| Illustration 1 | g01203892 |
Apply lubricant to the grease fittings (1) for the frame and for the lift arm. There is a grease fitting for each side of the machine.
Apply lubricant to the grease fitting (2) for the pivot for the linkage of bucket positioner and lift kickout.
Apply lubricant to the grease fittings (3) for the rod end of the lift cylinder. There is a grease fitting for each side of the machine.
Apply lubricant to the grease fittings (4) for the pivot pin at the loader lift arm. There is a grease fitting for each side of the machine.
Apply lubricant to the grease fittings (5) for the pivot bearings for the bucket tilt cylinder. There is a grease fitting in each linkage (four total).
Apply lubricant to the grease fitting (6) for the rod end of the tilt cylinder.
Apply lubricant to the grease fittings (7) for the upper pivot pin. There is a grease fitting for each side of the machine.
Apply lubricant to the grease fittings (8) for the lower pivot pins. There is a grease fitting for each side of the machine.
Apply lubricant to the grease fitting (9) for the pivot for the linkage of bucket positioner and lift kickout.
Apply lubricant to the grease fittings (10) for the head end of the lift cylinder. There is a grease fitting for each side of the machine.
There is a total of 18 grease fittings.
Open the engine access door on the top of the machine.
| |
| Illustration 2 | g01758234 |
Apply lubricant to the grease fitting for the pivot point for the lift arms.