2009/02/23 Caterpillar


New Oil Pump {1151, 1162, 1206}

Usage:

CB-214E 214
Mini Hydraulic Excavator:
301.5 (S/N: 3YW1-UP)
301.8 (S/N: BFA1-UP)
302.5 (S/N: 4AZ1-UP)
Paving Compactor:
CB-214E (S/N: 2141-UP)
CB-224D (S/N: 8RZ1-UP)
CB-224E (S/N: 2241-UP)
CB-225D (S/N: 9FZ1-UP)
CB-225E (S/N: 2251-UP)
CB-334D (S/N: 4CZ1-UP)
CB-334E (S/N: C3D1-UP; C4X1-UP)
CB-335D (S/N: 5PZ1-UP)
CB14 (S/N: DST1-UP; DTT1-UP)
CB22 (S/N: 2201-UP)
CB24 (S/N: 2401-UP)
CB32 (S/N: 3201-UP)
CB34 (S/N: 3451-UP; 3481-UP)
CB34XW (S/N: 3471-UP)
CC24 (S/N: 2411-UP)
CC34 XW (S/N: 3461-UP)
CC34 (S/N: 3491-UP)
Multi Terrain Loader:
247B (S/N: MTL1-UP)
257B (S/N: SLK1-UP)
Skid Steer Loader:
226B (S/N: MJH1-UP)
216 (S/N: RLL1-UP)
242B (S/N: BXM1-UP)
232B (S/N: SCH1-UP)
Service Magazine SEPD0980, 23 February 2009, "New Oil Pump". Disregard this article. See the replacement article that follows.

Description of Change: For the affected machines, new Front Gear Kits are available. Refer to table 1.

For the effective machines, the shaft for the new oil pump has been improved. The new oil pump lubricates the shaft, idler gear and the rotor more efficiently in order to improve reliability. As a result of this change, new Front Gear Kits are available. Refer to table 2.

Adaptable To: The 339-3016 Front Gear Kit is available for 3011, 3011C, C1.1 and C1.6 engines and the machines that are listed in table 1.

The 339-3014 Front Gear Kit is available for 3013, 3013C, 3014, 3024, C1.5 and C2.2 engines and the machines that are listed in table 1.

Table 1
Affected Machines    
(S/N: MTL1-05701)    
(S/N: SLK1-08304)    
(S/N: RLL1-07701)    
(S/N: MJH1-12175)    
(S/N: SCH1-02825)    
(S/N: BXM1-04775)    
(S/N: 3YW1-UP)    
(S/N: BFA1-UP)    
(S/N: 4AZ1-UP)    
(S/N: 2141-UP)    
(S/N: 8RZ1-UP)    
(S/N: 2241-UP)    
(S/N: 9FZ1-UP)    
(S/N: 2251-UP)    
(S/N: 4CZ1-UP)    
(S/N: C3D1-UP)    
(S/N: C4X1-UP)    
(S/N: 5PZ1-UP)    
The 339-3017 Front Gear Kit is available for C1.5, C1.5T, C2.2 and C2.2T engines and the machines that are listed in table 2.

The 339-3015 Front Gear Kit is available for C0.5 and C0.7 engines and the machines that are listed in table 2.

Table 2
Effective Machines    
(S/N: MTL05702-UP)    
(S/N: SLK08305-UP)    
(S/N: RLL07702-UP)    
(S/N: MJH12176-UP)    
(S/N: SCH02826-UP)    
(S/N: BXM04776-UP)    
(S/N: DST1-UP)    
(S/N: DTT1-UP)    
(S/N: 2201-UP)    
(S/N: 2401-UP)    
(S/N: 3201-UP)    
(S/N: 3451-UP)    
(S/N: 3481-UP)    
(S/N: 3471-UP)    
(S/N: 2411-UP)    
(S/N: 3461-UP)    
(S/N: 3491-UP)    

Caterpillar Information System:

R2900G Load Haul Dump Circuit Breakers - Reset
R1700G Load Haul Dump Circuit Breakers - Reset
EquipmentManager Dealer Administrator Manual Active Fleet
14H and 16H Motor Graders Hydraulic and Steering System Pump Efficiency (Gear Pumps) - Test
416E Backhoe Loader Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416E Backhoe Loader Lift Cylinder Brace - Connect and Disconnect
2008/11/01 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
797B Off-Highway Truck Mirror
416E Backhoe Loader Shipping the Machine
416E Backhoe Loader Leaving the Machine
12K, 140K, 140K Series 2 and 160K Motor Graders Hydraulic and Steering System Steering System
CB54, CB54 XW and CB64 Vibratory Compactor Propel System Brake Pump
793F and 797F Off-Highway Trucks Chassis Electronic Control System System Schematic
2008/12/01 Water Temperature Regulator {1355, 1380}
IT38H Integrated Toolcarrier and 938H Wheel Loader Alternator Air Vent Line and Screen - Clean
416E Backhoe Loader Alternate Exit
The Procedure for Servicing the Air Cleaner on Articulated Trucks{1051, 1054} The Procedure for Servicing the Air Cleaner on Articulated Trucks{1051, 1054}
2008/12/29 New Software Prevents the Discrepancy Between the Display on the Monitor and the Service Hour Meter Reading for Certain Excavators {7490, 7601, 7610, 7620}
2008/12/01 A New Bearing is Now Used on the Support for the Conveyor on Certain Cold Planers {7074}
C4.4 and C6.6 Engines for Caterpillar Built Machines Engine Cranks but Will Not Start
2008/12/29 An Improved Solenoid Valve Is Now Used {5132, 5479}
2009/02/16 An Improved Guard Assembly for the Fan Guard Is Now Used {1360}
2008/11/17 Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.