Caterpillar products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.
For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Illustration 1 | g01209193 |
Note: The letter "Z" may be stamped in the block that is identified as "Parts Order". This block is located on the plate for the Product Identification Number (PIN). This stamp indicates some customization to the machine which will require special handling when parts are ordered.
Machine PIN ____________________
Service Information Number Plate (SIN) ____________________
Illustration 2 | g01209191 |
Transmission Serial Number ____________________
Illustration 3 | g01456421 |
Engine Serial Number ____________________
If equipped, this message is used to verify the certification of the Product Link as an RF transmitter. The following specifications are provided to aid in ensuring compliance with all local regulations:
Operating frequency range | 148 to 150 MHz |
Transmitter power | 5-10 w |
This message is located on the control group for the Product Link. The control group is located on the top of the cab.
Illustration 4 | g01261742 |
This machine is equipped with a Caterpillar Product Link communication device. When electric detonators are used, this communication device should be deactivated within In cases where the type of Product Link module cannot be identified, Caterpillar recommends that the device be disabled no less than |
If the machine is required to work within
Consult your Cat dealer with any questions that concern the operation of the Product Link in a specific country.