2008/12/01 Caterpillar


New Primary Fuel Filter {1258, 1261, 1263}

Usage:

C4.4 444
Engine:
C4.4 (S/N: 4441-UP)
C6.6 (S/N: 6661-UP)
Generator Set:
C4.4 (S/N: D4B1-UP; D4D1-UP)
C6.6 (S/N: SDA1-UP; N6D1-UP)
C4.4 (S/N: GLD1-UP; GLE1-UP)

Description of Change: An improved primary fuel filter assembly has been introduced on the C4.4 and C6.6 engines. The new filter element has an improved level of filtration from twenty microns to ten microns. This change better maintains the service interval across both the secondary filter and the primary filter. The change was introduced in April 2008. The primary fuel filter bowl is not common for both canisters.

Adaptable To: The new ten micron 308-7298 Water Separator and Fuel Filter As replaces 271-5076 Water Separator and Fuel Filter As .

The new 308-7298 Water Separator and Fuel Filter As requires the new 310-5912 Bowl .

When the canister is replaced, 308-7298 Water Separator and Fuel Filter As must be installed. Refer to Operation and Maintenance Manual, "Fuel System Primary Filter (Water Separator) Element - Replace" for the correct procedure. It will not be necessary to replace the 310-5912 Bowl .

The 271-5076 Water Separator and Fuel Filter As is no longer available.

Caterpillar Information System:

795F and 795F Series AC Off-Highway Truck Power Train Ejector (Rock) - Remove and Install
Installing the Kits for a Powered Sideshift Control, an Eighth Function Auxiliary Control, and a Ninth Function Auxiliary Control{1408, 5051, 5057, 5705, 5808} Installing the Kits for a Powered Sideshift Control, an Eighth Function Auxiliary Control, and a Ninth Function Auxiliary Control{1408, 5051, 5057, 5705, 5808}
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Centershift Lock
EquipmentManager User Guide Reports
2008/12/08 New Clips Update the Power Train Oil Lines Group {3016, 3154}
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Combination Valve
Upgrade Procedure For The 793D Off-Highway Truck Steering Accumulator {1408, 4331, 5077} Upgrade Procedure For The 793D Off-Highway Truck Steering Accumulator {1408, 4331, 5077}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 2237 - FMI 02
RM-300 Soil Stabilizer Rotor Drive Shaft Universal Joints - Lubricate
120K and 120K Series 2 Motor Graders Hydraulic and Steering System Pump Control Valve (Implement, Steering)
2008/12/08 A New Engine Oil Cooler is Used {1378}
C9.3 Engines for Caterpillar Built Machines Aftercooler - Test
2008/11/24 New Primary Fuel Filter {1258, 1261, 1263}
Bench Test Procedure for a 793C Off-Highway Truck Transmission{3030, 3073} Bench Test Procedure for a 793C Off-Highway Truck Transmission{3030, 3073}
785D Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove
785D Off-Highway Truck/Tractor Engine Supplement Engine and Torque Converter - Install
785D Off-Highway Truck/Tractor Engine Supplement Engine and Torque Converter - Separate and Connect
2009/03/02 Update to the Testing and Adjusting , "Limit Switch (Stop Light) - Adjust" {1432, 1435, 4269}
416E Backhoe Loader Safety Messages
416E Backhoe Loader Plate Locations and Film Locations
2008/11/17 Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
416E Backhoe Loader Backup Alarm
416E Backhoe Loader Stabilizer Control
12K, 140K, 140K Series 2 and 160K Motor Graders Hydraulic and Steering System Steering System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.