Fluid Power and Electrical Graphic Symbols Caterpillar


Fluid Power Graphic Symbols

Usage:

SR4BHV ADT
Note: Use this module as a basic reference guide for graphic symbols. Do not use this module as a comprehensive reference guide.

Line Identification



Illustration 1g01387054
(A) Pressure line
(B) Pilot/Load sensing pressure line
(C) Drain/Return line
(D) Component line
(E) Attachment line
(F) Air Line

Valve Envelopes



Illustration 2g01345717
(G) One position
(H) Two-position
(J) Three-position

Fluid Storage Reservoirs



Illustration 3g01345911
(K) Vented
(L) Pressurized
(M) Return above fluid level
(N) Return below fluid level

Techniques For Crossing and Joining Lines



Illustration 4g01819313
(P) Line crossing
(R) Lines joining

Valve Ports



Illustration 5g01353004
(S) Two-way
(T) Three-way
(U) Four way

Fluid Conditioners



Illustration 6g01353011
(V) Filter or strainer


Illustration 7g01386985
Separators
(W) Manual drain
(X) Automatic drain


Illustration 8g01386986
Filter separators
(Y) Manual drain
(Z) Automatic drain

Basic Component Symbols



Illustration 9g01819355
(AA) Pump or motor
(AB) Fluid conditioner
(AC) Control valves
(AD) Spring
(AE) Restriction
(AF) Line restriction
(AG) Two-section pump
(1) Main
(2) Auxiliary
(AH) Adjustable spring
(AJ) Line restriction (variable)
(AK) Variability

Supplemental Component Symbols



Illustration 10g01819393
Energy triangles
(AL) Hydraulic
(AM) Pneumatic


Illustration 11g01819413
Measurement
(AN) Pressure
(AP) Temperature
(AR) Pressure tap
(AS) Flow


Illustration 12g01819434
(AT) Unidirectional
(AU) Bidirectional

Pilot Control Symbols



Illustration 13g01820233
Released pressure
(AV) External return
(AW) Internal return


Illustration 14g01820235
Remote supply pressure
(AX) Simplified
(AY) Complete
(AZ) Internal pressure supply

Manual Control Symbols



Illustration 15g01820255
(BA) Push-pull lever
(BB) General manual
(BC) Pedal
(BD) Push button
(BE) Spring
(BF) Manual shutoff

Accumulators



Illustration 16g01353246
(BG) Spring loaded
(BH) Gas charged

Combination Controls



Illustration 17g01820273
(BJ) Solenoid or manual
(BK) Solenoid and pilot
(BL) Solenoid, pilot, or manual


Illustration 18g01629934
(CP) Connector (Mechanical Stop)

Electrical Controls



Illustration 19g01353280
(BM) Solenoid

Miscellaneous Controls



Illustration 20g01820293
(BN) Servo
(BP) Thermal
(BR) Detent

Hydraulic, Pneumatic Cylinders



Illustration 21g01353333
Single acting


Illustration 22g01387001
Double acting
(BS) Single end rod
(BT) Double end rod

Hydraulic Pumps



Illustration 23g01820296
Fixed displacement
(BU) Unidirectional
(BV) Bidirectional


Illustration 24g01820298
Variable displacement
(BW) Unidirectional
(BX) Bidirectional simplified
(BY) Bidirectional complete

Hydraulic Motors



Illustration 25g01820313
Fixed displacement
(BZ) Unidirectional
(CA) Bidirectional


Illustration 26g01820314
Variable displacement
(CB) Unidirectional
(CC) Bidirectional

Shutoff Valves



Illustration 27g01820321
(CD) Basic symbols
(CE) Manual shutoff valve

One-Way Check Valves



Illustration 28g01353434
(CF) Basic symbol
(CG) Spring loaded

Internal Passageways



Illustration 29g01820338
(CH) Infinite position
(3) Flow in one direction
(CJ) Two-position
(4) Flow allowed in either direction
(CK) Three-position
(5) Parallel flow
(6) Cross flow

Pressure Differential Valve



Illustration 30g01358506
(7) Inlet (X psi)
(8) Outlet (Y psi)

Control Valves



Illustration 31g01820466
(CL) Normal position
(CM) Shifted position
(CN) Infinite Position

Simple Single Function Circuit



Illustration 32g01358688
(9) 45 L/min (12 US gpm)
(10) 17000 kPa (2500 psi)
(11) 450 kPa (65 psi)


Illustration 33g01358901
(12) Three-position four-way open centered motor spool and pilot controlled directional controlled valve
(13) Combination crossover relief valve and makeup valve ( 24000 kPa (3500 psi))
(14) Bidirectional motor
(15) Main system relief valve
(16) Pressure reducing pilot controlled valves
(17) Check valve
(18) Gas charged accumulator
(19) Main pump motor ( 115 L/min (30 us gpm))
(20) Pilot pump motor ( 19 L/min (5 us gpm))
(21) Pilot filter and bypass valve
(22) Pilot relief valve ( 2250 kPa (325 psi)
(23) Two positioned two-way pilot system disconnect valve
(24) Tank

Caterpillar Information System:

14M and 16M Motor Graders Hydraulic and Steering System Articulation Cylinder
AQUILATM ComManager3 ; MachineManager3 General Information
AQUILATM ComManager3 ; MachineManager3 Configuration (MachineManager)
AQUILATM ComManager3 ; MachineManager3 Configuration (ComManager)
AP655D Asphalt Paver Sound Information and Vibration Information
966H and 972H Wheel Loaders Bucket Hinge and Lift Arm Clearance Shims - Inspect/Adjust/Replace
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Relief Valve (Steering Priority) - Test and Adjust
AccuGrade® GPS Stopping Operation
C32 Marine Engine Timing - Calibrate
C4.4 and C6.6 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
2007/03/19 The Rear Cab Support May Need Adjustment in Order to Improve Clearance for the Mounting Bolts {7266, 7301}
777D Off-Highway Truck Power Train Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission)
14L Motor Grader Machine Systems Centershift Lock - Disassemble
14L Motor Grader Machine Systems Centershift Lock - Assemble
AQUILATM ComManager3 ; MachineManager3 MachineManager Operation for Dragline
AQUILATM ComManager3 ; MachineManager3 MachineManager Operation for Drill
777F Off-Highway Truck Machine Systems Service Brake (Front Oil Cooled) - Assemble
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Boom - Fore Boom
IT38H Integrated Toolcarrier and 938H Wheel Loader Machine Systems Cab - Install
AP655D and BG655D Asphalt Pavers Plate Locations and Film Locations
AP655D and BG655D Asphalt Pavers Fire Extinguisher Location
2007/02/12 The Guideline For the Operating Altitude On Certain Backhoe Loaders Has Been Revised {1000, 1059, 7000}
AP655D Asphalt Paver Operator Controls
14M and 16M Motor Graders Hydraulic and Steering System Centershift Lock
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.