Boom - Fore Boom
Show/hide table
Illustration 1 | g03895217 |
Show/hide table
Specification for 257-0618 Fore Boom Gp | |||
Item | Qty | Part | Specification Description |
All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to coat all bores for pins, the stub boom, the stick, and the cylinder pin bores. | |||
1 | 2 | 198-6288 Bushing | Bore before assembly is |
2 | 1 | 202-3167 Pin As | Diameter is |
3 | 1 | 198-6285 Pin As | Diameter is |
4 | 2 | 8T-4780 Bolt | Torque to |
5 | As required, use the following shims to adjust lateral clearance to the maximum of |
||
1 | 093-0083 Shim | Thickness is |
|
1 | 7Y-2498 Shim | Thickness is |
|
6 | As required, use the following shims to adjust lateral clearance to the maximum of |
||
1 | 202-8832 Shim | Thickness is |
|
1 | 202-8833 Shim | Thickness is |
|
7 | 1 | 202-3165 Pin As | Diameter is |
8 | As required, use the following shims to adjust lateral clearance to the maximum of |
||
1 | 133-2425 Shim | Thickness is |
|
1 | 093-0115 Shim | Thickness is |
|
9 | As required, use the following shims to adjust lateral clearance to the maximum of |
||
1 | 202-8834 Shim | Thickness is |
|
2 | 202-8835 Shim | Thickness is |
|
10 | As required, use the following shims to adjust lateral clearance to maximum of |
||
1 | 133-2426 Shim | Thickness is |
|
1 | 093-0084 Shim | Thickness is |
|
1 | 093-0116 Shim | Thickness is |
|
11 | 1 | 7Y-2497 Shim | As required, use the shim with the thickness of |
Caterpillar Information System:
777F Off-Highway Truck Machine Systems Service Brake (Front Oil Cooled) - Assemble
AQUILATM ComManager3 ; MachineManager3 MachineManager Operation for Drill
AQUILATM ComManager3 ; MachineManager3 MachineManager Operation for Dragline
14L Motor Grader Machine Systems Centershift Lock - Assemble
14L Motor Grader Machine Systems Centershift Lock - Disassemble
Fluid Power and Electrical Graphic Symbols Fluid Power Graphic Symbols
14M and 16M Motor Graders Hydraulic and Steering System Articulation Cylinder
AQUILATM ComManager3 ; MachineManager3 General Information
AQUILATM ComManager3 ; MachineManager3 Configuration (MachineManager)
AQUILATM ComManager3 ; MachineManager3 Configuration (ComManager)
AP655D Asphalt Paver Sound Information and Vibration Information
966H and 972H Wheel Loaders Bucket Hinge and Lift Arm Clearance Shims - Inspect/Adjust/Replace
IT38H Integrated Toolcarrier and 938H Wheel Loader Machine Systems Cab - Install
AP655D and BG655D Asphalt Pavers Plate Locations and Film Locations
AP655D and BG655D Asphalt Pavers Fire Extinguisher Location
2007/02/12 The Guideline For the Operating Altitude On Certain Backhoe Loaders Has Been Revised {1000, 1059, 7000}
AP655D Asphalt Paver Operator Controls
14M and 16M Motor Graders Hydraulic and Steering System Centershift Lock
M313D, M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Machine System Specifications Control Valve (Boom Lowering)
770 and 772 Off-Highway Truck Hydraulic and Braking System Hoist Cylinder Performance - Test
14L Motor Grader Machine Systems Solenoid Valve (Centershift Lock) - Remove and Install
2009/04/20 Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Lift Arms - Remove - Radial Lift
IT38H Integrated Toolcarrier and 938H Wheel Loader Power Train Bypass Valve (Transmission Oil Cooler) - Remove