Centershift Lock - Assemble
组装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装密封件 (17) 。 安装密封件 (16) 。 安装销 (15) 。
Show/hide table
 | |
| 图 1 | g01345668 |
Show/hide table
 | |
| 图 2 | g01345667 |
- 安装环 (14) 。 安装油封 (13) 。
Show/hide table
 | |
| 图 3 | g01345661 |
- 安装活塞 (12) 。 安装螺栓 (11) 。
Show/hide table
 | |
| 图 4 | g01345658 |
- 安装密封件 (10) 。 安装接头 (9) 。
Show/hide table
 | |
| 图 5 | g01345654 |
- 安装盖 (8) 。 安装螺栓 (7) 。
Show/hide table
 | |
| 图 6 | g01345652 |
- 安装接头 (6) 。 安装软管组件 (5) 。 连接接头 (4) 。
Show/hide table
 | |
| 图 7 | g01345648 |
- 安装垫片 (3) 。 安装 O 形密封圈 (2) 。
注: 使用最少量的垫片，在回路打开后，半转开关。
Show/hide table
 | |
| 图 8 | g01345643 |
- 安装开关 (1) 。 拧紧开关 (1) 至扭矩 9.5 ± 0.5 N·m (84 ± 4 lb in)。
Show/hide table
 | |
| 图 9 | g01345639 |
End By:
- 安装电磁阀。 请参阅 拆解和组装, "电磁阀（转盘中心移动锁）- 拆卸和安装"。
- 安装转盘中心移动锁。 请参阅 拆解和组装, "转盘中心移动锁 - 安装"。
Caterpillar Information System:
14L Motor Grader Machine Systems Centershift Lock - Disassemble
Fluid Power and Electrical Graphic Symbols Fluid Power Graphic Symbols
14M and 16M Motor Graders Hydraulic and Steering System Articulation Cylinder
AQUILATM ComManager3 ; MachineManager3 General Information
AQUILATM ComManager3 ; MachineManager3 Configuration (MachineManager)
AQUILATM ComManager3 ; MachineManager3 Configuration (ComManager)
AP655D Asphalt Paver Sound Information and Vibration Information
966H and 972H Wheel Loaders Bucket Hinge and Lift Arm Clearance Shims - Inspect/Adjust/Replace
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Relief Valve (Steering Priority) - Test and Adjust
AccuGrade® GPS Stopping Operation
C32 Marine Engine Timing - Calibrate
C4.4 and C6.6 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
AQUILATM ComManager3 ; MachineManager3 MachineManager Operation for Dragline
AQUILATM ComManager3 ; MachineManager3 MachineManager Operation for Drill
777F Off-Highway Truck Machine Systems Service Brake (Front Oil Cooled) - Assemble
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Boom - Fore Boom
IT38H Integrated Toolcarrier and 938H Wheel Loader Machine Systems Cab - Install
AP655D and BG655D Asphalt Pavers Plate Locations and Film Locations
AP655D and BG655D Asphalt Pavers Fire Extinguisher Location
2007/02/12 The Guideline For the Operating Altitude On Certain Backhoe Loaders Has Been Revised {1000, 1059, 7000}
AP655D Asphalt Paver Operator Controls
14M and 16M Motor Graders Hydraulic and Steering System Centershift Lock
M313D, M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Machine System Specifications Control Valve (Boom Lowering)
770 and 772 Off-Highway Truck Hydraulic and Braking System Hoist Cylinder Performance - Test