PRODUCT SUPPORT PROGRAM FOR REWORKING THE HARNESS AT THE ECM CONNECTOR ON CERTAIN C9.3, C13, C15, AND C18 INDUSTRIAL ENGINES
Usage:
REBE7922-00
Show/hide table
| 22Dec2011 |
U-585
O-511
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REWORKING THE HARNESS AT THE ECM CONNECTOR ON CERTAIN C9.3, C13, C15, AND C18 INDUSTRIAL ENGINES |
|
| 1408 | PS43474 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43474" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Dec2013 |
PROBLEM
Show/hide table
| The wiring for the engine indicator lamps are inserted into incorrect locations on the ECM connector on 367-7017 and 367-7018 Harnesses. This causes the engine warning lamp to illuminate when the engine shutdown lamp should illuminate, and for the engine shutdown lamp to illuminate when the engine warning lamp should illuminate. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C13 | KWJ00179, 218, 322, 1086, 1089 |
| C15 | LDN01028, 1055 |
| C18 | BDN01056 |
| C9.3 | C9N00517-00518, 573-574, 597, 600, 605, 684-685, 698-699, 701-703, 746, 798-799, 802-804, 848, 862-865 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Rework procedure involves changing the pin location for two wires on the engine ECM P1 connector. Use a Deutsch pin/socket removal tool to remove the wires from engine ECM P1 connector pin 28 and pin 29. Insert the red wire F404-CM4 into pin 28. Insert the green wire F420-CM5 into pin 29. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRAIN VALVE GROUP ON CERTAIN C7 AND C9 PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRAIN VALVE GROUP ON CERTAIN C7 AND C9 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR CORE ON CERTAIN 345C, 345D, AND 349D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR CORE ON CERTAIN 345C, 345D, AND 349D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CE CERTIFICATION LABEL ON CERTAIN C32 PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CE CERTIFICATION LABEL ON CERTAIN C32 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLAME ARRESTORS ON CERTAIN G3500E ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLAME ARRESTORS ON CERTAIN G3500E ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE OIL MIST DETECTOR ON MARINE AND PETROLEUM 3616 AND C280-16 ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE OIL MIST DETECTOR ON MARINE AND PETROLEUM 3616 AND C280-16 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLER ON CERTAIN C9.3 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLER ON CERTAIN C9.3 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SENSING HOSES AND ADAPTERS ON THE 326-1456 AND 352-8230 OIL PRESSURE REGULATOR GROUPS ON CERTAIN C175 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SENSING HOSES AND ADAPTERS ON THE 326-1456 AND 352-8230 OIL PRESSURE REGULATOR GROUPS ON CERTAIN C175 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING COOLANT IN CERTAIN C7S ENGINES IN SCHOOL BUSES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING COOLANT IN CERTAIN C7S ENGINES IN SCHOOL BUSES
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLERS AND REPLACING THE OUTLET CHECK VALVES OF THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 INDUSTRIAL ENGINES - MULTIPLE REPAIRS PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLERS AND REPLACING THE OUTLET CHECK VALVES OF THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 INDUSTRIAL ENGINES - MULTIPLE REPAIRS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE CYLINDER PACKS ON CERTAIN C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE CYLINDER PACKS ON CERTAIN C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES LOCATED IN COUNTRIES WITH LOW REGULATED FUEL PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES LOCATED IN COUNTRIES WITH LOW REGULATED FUEL
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE WIRING HARNESSES ON SERVICE REPLACEMENT 3516B ENGINES IN DEALER PARTS STOCK AND DEALER EXCHANGE INVENTORY PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE WIRING HARNESSES ON SERVICE REPLACEMENT 3516B ENGINES IN DEALER PARTS STOCK AND DEALER EXCHANGE INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 8T-3020 CONNECTOR ON CERTAIN C27 AND C32 ENGINES, XQ800 RENTAL GENERATOR SETS, 775G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 8T-3020 CONNECTOR ON CERTAIN C27 AND C32 ENGINES, XQ800 RENTAL GENERATOR SETS, 775G OFF-HIGHWAY TRUCKS, 992K, AND 993K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN C13, C15, AND C18 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN C13, C15, AND C18 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A FUEL HEATER HOSE AND UPDATING SOFTWARE ON CERTAIN G3500B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A FUEL HEATER HOSE AND UPDATING SOFTWARE ON CERTAIN G3500B ENGINES
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE ENGINE SOFTWARE ON CERTAIN C175 GENERATOR SETS OPERATING AT 1500 RPM PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE ENGINE SOFTWARE ON CERTAIN C175 GENERATOR SETS OPERATING AT 1500 RPM
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER PUMP OIL SUPPLY HOSE ON CERTAIN C175-16 PETROLEUM GENERATOR SET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER PUMP OIL SUPPLY HOSE ON CERTAIN C175-16 PETROLEUM GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON CERTAIN 3512C OIL WELL SERVICE ENGINES, AND C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON CERTAIN 3512C OIL WELL SERVICE ENGINES, AND C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN BELT GUARD BRACKET ON CERTAIN 3512C, AND 3516C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN BELT GUARD BRACKET ON CERTAIN 3512C, AND 3516C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) ON CERTAIN C32 GENERATOR SETS