Hood - Install
- Attach a suitable lifting device to hood (1). The weight of hood (1) is approximately
85 kg (190 lb) . - Install hood (1).
- Install clevis pin (6) and cotter pin (7).
- Repeat Step 3 for the opposite side.
Show/hide table
Illustration 3 g01157057 - Install prop (2).
Show/hide table
Illustration 4 g01068132 - Install strut (5) to bracket (3).
- Install nut (4).
- Repeat Step 6 through Step 7 for the opposite side.
Show/hide table
Illustration 5 g01156730 - Place prop (2) in the stored position and lower hood (1).
Show/hide table
Illustration 1 | g01156731 |
Show/hide table
Illustration 2 | g01068445 |
End By:
- Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Caterpillar Information System:
R2900G Load Haul Dump C15 Engine Supplement Hood - Remove
R2900G Load Haul Dump Machine Electrical System Indicator - Residual Brake Oil Pressure
R2900G Load Haul Dump Machine Electrical System Indicator - Automatic Lubrication
R2900G Load Haul Dump C15 Engine Supplement System Pressure - Release
Nexus Gear Pump Porting{5073} Nexus Gear Pump Porting{5073}
R2900G Load Haul Dump C15 Engine Supplement Steering Frame Lock - Remove and Install
Procedure to Install EP Control Plate on the Paving Compactors{5455} Procedure to Install EP Control Plate on the Paving Compactors{5455}
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump - Install
2005/02/28 Finding the Latest Flash Files {7620}
2005/03/07 An Improved Sight Gauge Is Now Available {5056}
C7 and C9 Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
R2900G Load Haul Dump Machine Electrical System Autoshift Control (Wheel Steering)
R2900G Load Haul Dump Machine Electrical System Autoshift Control (STIC Steering)
R2900G Load Haul Dump C15 Engine Supplement Bottom Guard (Engine) - Remove and Install
R2900G Load Haul Dump Power Train Bottom Guard (Transmission) - Remove and Install
R2900G Load Haul Dump Power Train Bottom Guard (Torque Converter) - Remove and Install
R2900G Load Haul Dump Power Train Relief Valve (Torque Converter Outlet) - Remove
R2900G Load Haul Dump Power Train Relief Valve (Torque Converter Outlet) - Install
834H Wheel Dozer and 836H Landfill Compactor Power Train Axle Guards (Rear) - Remove and Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Main Control Valve - Remove
988H and 988K Wheel Loaders Power Train Axle Shaft - Remove and Install
Cat® Digital Voltage Regulator Gain Setting - Adjust
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Install