Swivel - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
ZZ     | 6V-9509     | Face Seal Plug     | 6     |
6V-9830 | Cap As     | 6     | |
6V-9512 | Face Seal Plug     | 2     | |
6V-9833 | Cap As     | 2     | |
9U-7085 | Tapered Cap/Plug     | 8     | |
6V-9511 | Plug     | 4     | |
6V-9832 | Cap As     | 4     |
Start By:
- Release the pressure in the hydraulic system. Refer to Disassembly and Assembly Manual, "System Pressure - Release".
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
- Disconnect hose assemblies (2) from the bottom of swivel (1) .
Show/hide table
Illustration 1 | g01030434 |
- Attach a suitable lifting device with Tooling (A) to swivel (1), as shown. Disconnect hose assemblies (3) from the top of swivel (1). Remove bolts (3A) .
Show/hide table
Illustration 2 | g01030506 |
- Remove caps (5), (7), (8), (11), and (12). Remove fittings (4), (6), (9), (10), and (13). Remove bolts (14) .
Show/hide table
Illustration 3 | g01026369 |
- Remove the swivel. The weight of the swivel is approximately 70 kg (155 lb).
Caterpillar Information System:
2005/04/11 New Software Enables Seven Different Joystick Control Patterns for Track Feller Bunchers that Are Equipped with a Felling Head {0653, 5705, 7490, 7620}
3054E Engines for Caterpillar Built Machines Turbocharger - Inspect
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Gear and Bearing - Install
725 and 730 Articulated Trucks Braking System Machine Preparation for Troubleshooting
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Gear and Bearing - Remove
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Right Propel) - Install
3054E Engines for Caterpillar Built Machines Valve Depth - Inspect
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Stub Shaft
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Air Cleaner
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Right Propel) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Drive - Assemble
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Drive - Disassemble
834H Wheel Dozer and 836H Landfill Compactor Power Train Diagnostic Code List
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Install
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Pump Drive - Remove
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System Piston Motor (Drum Propel) - Optional Split Drum
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Chain Drive (Rotor)
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Disassemble
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Engine Enclosure (Hood)
C27 and C32 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C15 and C18 Engines for Caterpillar Built Machines E441 Idle Elevated to Increase Battery Voltage
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Assemble
R2900G Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R2900G Load Haul Dump Power Train Electronic Control System Switches