Pump Drive - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Brackets | 2 |
Start By:
- Remove the piston pump (left propel). Refer to Disassembly and Assembly, "Piston Pump (Left Propel) - Remove".
- Remove the piston pump (right propel). Refer to Disassembly and Assembly, "Piston Pump (Right Propel) - Remove".
- Remove bolt (2) from support (3) on both sides of pump drive (1).
Show/hide table
Illustration 2 g01141940 Show/hide tableIllustration 3 g01141862 - Attach Tooling (A) and a suitable lifting device to pump drive (1). Raise pump drive (1) slightly and install suitable wood blocks under the rear of the engine. Lower the engine onto the blocks.
- Remove bolts (5) from the rear of the engine.
- Remove bolts (4) from both sides of pump drive (1) and remove both supports (3).
- Remove pump drive (1) from the machine. The weight of pump drive (1) is approximately
131 kg (288 lb) .
Show/hide table
Illustration 1 | g01141861 |
Caterpillar Information System:
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Install
834H Wheel Dozer and 836H Landfill Compactor Power Train Diagnostic Code List
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Remove
2005/04/11 New Software Enables Seven Different Joystick Control Patterns for Track Feller Bunchers that Are Equipped with a Felling Head {0653, 5705, 7490, 7620}
3054E Engines for Caterpillar Built Machines Turbocharger - Inspect
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Gear and Bearing - Install
725 and 730 Articulated Trucks Braking System Machine Preparation for Troubleshooting
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Gear and Bearing - Remove
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Right Propel) - Install
3054E Engines for Caterpillar Built Machines Valve Depth - Inspect
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Stub Shaft
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Air Cleaner
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System Piston Motor (Drum Propel) - Optional Split Drum
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Chain Drive (Rotor)
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Disassemble
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Engine Enclosure (Hood)
C27 and C32 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C15 and C18 Engines for Caterpillar Built Machines E441 Idle Elevated to Increase Battery Voltage
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Assemble
R2900G Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R2900G Load Haul Dump Power Train Electronic Control System Switches
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Quality - Test
3054E Engines for Caterpillar Built Machines Cooling System - Check
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Chain Drive Case and Cover (Rotor)