Swivel - Disassemble
Disassembly Procedure
Start By:
- Remove the swivel. Refer to Disassembly and Assembly, "Swivel - Remove".
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) and remove cover (2). Remove O-ring seal (3). Remove bolts (4) and washers (5). Remove retainer (6) .
Show/hide table
 | |
| Illustration 1 | g01030548 |
- Separate housings (7) and (10) from rotor (8). Remove O-ring seal (9) from housing (7) .
- Remove seal assemblies (11) from both housings (7) and (10). Remove O-ring seals (12) from the bottom of housing (10) .
Show/hide table
 | |
| Illustration 2 | g01030565 |
Caterpillar Information System:
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Chain Drive (Rotor)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System Piston Motor (Drum Propel) - Optional Split Drum
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Pump Drive - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Install
834H Wheel Dozer and 836H Landfill Compactor Power Train Diagnostic Code List
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Remove
2005/04/11 New Software Enables Seven Different Joystick Control Patterns for Track Feller Bunchers that Are Equipped with a Felling Head {0653, 5705, 7490, 7620}
3054E Engines for Caterpillar Built Machines Turbocharger - Inspect
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Gear and Bearing - Install
725 and 730 Articulated Trucks Braking System Machine Preparation for Troubleshooting
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Gear and Bearing - Remove
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Right Propel) - Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Engine Enclosure (Hood)
C27 and C32 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C15 and C18 Engines for Caterpillar Built Machines E441 Idle Elevated to Increase Battery Voltage
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swivel - Assemble
R2900G Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R2900G Load Haul Dump Power Train Electronic Control System Switches
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Quality - Test
3054E Engines for Caterpillar Built Machines Cooling System - Check
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Chain Drive Case and Cover (Rotor)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System Piston Pump (Propel) - Optional Split Drum
988H and 988K Wheel Loaders Power Train Torque Converter (Freewheel Stator) (Lockup) - Disassemble
C4.4 (Mech) Industrial Engine Cooling System - Test