Feeder Drive Shaft Group - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 9S-3263 | 螺纹锁固胶 | 1 |
- 将盖 (16) 安装到轴 (2) 上。
Show/hide table
| 图 1 | g01140935 |
- 将工具 (A) 涂覆到螺栓 (15) 上。 将螺栓 (15) 安装到轴 (2) 上。
- 将键 (14) 安装到轴 (2) 中。
Show/hide table
| 图 2 | g01140930 |
- 安装垫圈 (11) 。
Show/hide table
| 图 3 | g01140924 |
- 安装链轮 (12) 。
- 将工具 (A) 涂覆到调整螺钉 (13) 上。 安装调整螺钉 (13) 。
- 安装轴承 (10) 。
Show/hide table
| 图 4 | g01140913 |
- 将工具 (A) 涂覆到调整螺钉 (9) 上。 安装调整螺钉 (9) 。
- 安装隔套组件 (8) ，然后拧紧调整螺钉 (7) 。
Show/hide table
| 图 5 | g01140906 |
- 拧紧轴 (6) 上的调整螺钉 (5) 。
Show/hide table
| 图 6 | g01140882 |
- 安装链轮 (4) 。
Show/hide table
| 图 7 | g01141021 |
- 测量从右链轮外侧到左链轮外侧之间的距离。 该距离即尺寸 (X) 。 尺寸 (X) 的测量值应为 630 mm (24.8 in)。
- 将工具 (A) 涂覆到调整螺钉 (3) 上，然后将调整螺钉 (3) 安装到链轮 (4) 中。
- 将垫圈 (1) 安装在轴 (2) 上。
Show/hide table
| 图 8 | g01140773 |
End By: 安装送料机传动轴总成。 请参考 拆解和组装, "送料机传动轴总成 - 拆卸"。
Caterpillar Information System:
2005/02/07 A Correction to A New Engine Coolant Heater Is Available {1383}
793D Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve - Install
793D Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve - Remove
793D Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
793D Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
PM-201 Cold Planer Belt - Inspect/Adjust/Replace
2005/06/13 The Load Control Valve (Drift Reduction Valve) for the Boom Is Improved {5067, 5117, 5147, 5811}
PM-201 Cold Planer Belt Tensioner (Rotor Drive) Pulley - Lubricate
R2900G Load Haul Dump Braking System Solenoid Valve (Parking Brake) - Test
R2900G Load Haul Dump Lubricant Viscosities
R2900G Load Haul Dump Capacities (Refill)
R2900G Load Haul Dump Window Wiper - Inspect/Replace - If Equipped
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Drag Conveyor and Right Auger Conveyor) - Install
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Fuel Tank - Remove
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 2119 - FMI 03
14L Motor Grader Machine Systems Circle
120M, 12M, 140M and 160M Motor Graders Machine Systems Front Axle
120M, 12M, 140M and 160M Motor Graders Machine Systems Step Group
120M, 12M, 140M and 160M Motor Graders Machine Systems Governor (Air Compressor) - Test and Adjust
PM-201 Cold Planer Circuit Breakers - Reset
2005/02/07 The Sleeve Bearings That Are Used In Some Idler Gears, Cluster Gears, Cage Assemblies, And Adapter Assemblies Are Now Available For Parts Service {1206, 7551}
2005/04/25 Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
C11 and C15 Engines for Caterpillar Built Machines Sensors and Electrical Connectors