Oil Filter and Base (Transmission Charging) - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 2     |
ZZ     | 2J-2668     | 罩盖     | 2     |
注: 维修数据:拆卸和安装中的工具 (ZZ) 将不在图示中列出。 显示这一工具是为了协助有经验的维修人员。
- 断开线束组件 (1) 。
Show/hide table
图 1 | g01140907 |
- 拆下电缆扎带 (2) 。
- 将工具 (A) 和适当的起吊设备连接到机油滤清器底座 (3) 。
Show/hide table
图 2 | g01140908 |
- 断开软管组件 (4) 。
- 拆下机油滤清器底座 (3) 。
Caterpillar Information System:
PM-201 Cold Planer Belt - Inspect/Adjust/Replace
2005/06/13 The Load Control Valve (Drift Reduction Valve) for the Boom Is Improved {5067, 5117, 5147, 5811}
PM-201 Cold Planer Belt Tensioner (Rotor Drive) Pulley - Lubricate
R2900G Load Haul Dump Braking System Solenoid Valve (Parking Brake) - Test
R2900G Load Haul Dump Lubricant Viscosities
R2900G Load Haul Dump Capacities (Refill)
R2900G Load Haul Dump Window Wiper - Inspect/Replace - If Equipped
R2900G Load Haul Dump Window - Clean - If Equipped
PM-201 Cold Planer Belt Tensioner (Rotor Drive) Idler and Cylinder Ends - Lubricate
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 13
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 1964 - FMI 08
PM-201 Cold Planer Backup Alarm - Test
793D Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
793D Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve - Remove
793D Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve - Install
2005/02/07 A Correction to A New Engine Coolant Heater Is Available {1383}
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Assemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Drag Conveyor and Right Auger Conveyor) - Install
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Fuel Tank - Remove
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 2119 - FMI 03
14L Motor Grader Machine Systems Circle
120M, 12M, 140M and 160M Motor Graders Machine Systems Front Axle
120M, 12M, 140M and 160M Motor Graders Machine Systems Step Group