A Correction to A New Engine Coolant Heater Is Available {1383}
- Backhoe Loaders:
- 416 (S/N: 5PC1-UP)
- 426 (S/N: 7BC1-UP)
- 428 (S/N: 6TC1-UP)
- 436 (S/N: 5KF1-UP)
- 438 (S/N: 3DJ1-UP)
A new engine coolant heater is available. You install the heater in the engine block in place of an expansion plug. The vendor part number for the heater is 3100013. The engine coolant heater is available from Phillips-Temro. Contract Phillips-Temro at telephone number (952)-941-9700
Caterpillar Information System:
793D Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve - Install
793D Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve - Remove
793D Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
793D Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
PM-201 Cold Planer Belt - Inspect/Adjust/Replace
2005/06/13 The Load Control Valve (Drift Reduction Valve) for the Boom Is Improved {5067, 5117, 5147, 5811}
PM-201 Cold Planer Belt Tensioner (Rotor Drive) Pulley - Lubricate
R2900G Load Haul Dump Braking System Solenoid Valve (Parking Brake) - Test
R2900G Load Haul Dump Lubricant Viscosities
R2900G Load Haul Dump Capacities (Refill)
R2900G Load Haul Dump Window Wiper - Inspect/Replace - If Equipped
R2900G Load Haul Dump Window - Clean - If Equipped
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Assemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Drag Conveyor and Right Auger Conveyor) - Install
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Fuel Tank - Remove
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 2119 - FMI 03
14L Motor Grader Machine Systems Circle
120M, 12M, 140M and 160M Motor Graders Machine Systems Front Axle
120M, 12M, 140M and 160M Motor Graders Machine Systems Step Group
120M, 12M, 140M and 160M Motor Graders Machine Systems Governor (Air Compressor) - Test and Adjust
PM-201 Cold Planer Circuit Breakers - Reset
2005/02/07 The Sleeve Bearings That Are Used In Some Idler Gears, Cluster Gears, Cage Assemblies, And Adapter Assemblies Are Now Available For Parts Service {1206, 7551}
2005/04/25 Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}