Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
- Caterpillar Products:
- All
Show/hide table
Illustration 1 | g01157067 |
7I-7133 Cover Plate |
Show/hide table
Illustration 2 | g01157068 |
7I-7151 Flange |
Dealer Service Tools offers the 7I-7133 Cover Plate and the 7I-7151 Flange for use during flow tests on the main hydraulic pumps for most Caterpillar machines.
The 7I-7133 Cover Plate blocks a port for the test. The 7I-7151 Flange has a No. 16 port for plumbing in a flow meter.
Show/hide table
Specifications for Cover Plate and Flange     | ||
Plate Dimensions     | Bolt Hole Dimensions     | Thread Specifications     |
7I-7133 Cover Plate     | ||
96.7 X 61.8 X 18 mm (3.81 X 2.43 X 0.71 inch)     |
4 holes with centers located on corners of 66.7 X 31.8 mm (2.63 X 1.25 inch) rectangle     |
Bolt holes M12 X 1.75 X 6H THD     |
7I-7151 Flange     | ||
98 X 70 X 22 mm (3.9 X 2.8 X 0.9 inch)     |
4 holes with enters located on corners of 77.8 X 42.9 mm (3.06 X 1.69 inch) rectangle     |
No thread on bolt holesNo.16 port with 1-5/16-12-2B THD     |
Caterpillar Information System:
2005/02/07 The Sleeve Bearings That Are Used In Some Idler Gears, Cluster Gears, Cage Assemblies, And Adapter Assemblies Are Now Available For Parts Service {1206, 7551}
PM-201 Cold Planer Circuit Breakers - Reset
120M, 12M, 140M and 160M Motor Graders Machine Systems Governor (Air Compressor) - Test and Adjust
120M, 12M, 140M and 160M Motor Graders Machine Systems Step Group
120M, 12M, 140M and 160M Motor Graders Machine Systems Front Axle
14L Motor Grader Machine Systems Circle
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System MID 082 - CID 2119 - FMI 03
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Fuel Tank - Remove
120M, 12M, 140M and 160M Motor Graders Machine Systems Blade Lift
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Drag Conveyor and Right Auger Conveyor) - Install
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Assemble
2005/02/07 A Correction to A New Engine Coolant Heater Is Available {1383}
C11 and C15 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
793D Off-Highway Truck/Tractor Electronic Control Module (Road Analysis Control) - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Feeder Drive Shaft Group - Remove
PM-201 Cold Planer Compressed Air System - Inspect
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Fuel Tank - Install
PM-201 Cold Planer Compressed Air System Air Filter Element - Clean/Replace
PM-201 Cold Planer Compressed Air System Lubricator Oil Level - Check
PM-201 Cold Planer Conveyor Swing Cylinder Pins - Lubricate
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Final Drive - Assemble
793D Off-Highway Truck/Tractor Electronic Control Module (VIMS Main Module) - Remove and Install
PM-201 Cold Planer Engine Oil Level - Check
PM-201 Cold Planer Engine Oil Sample - Obtain