General Information Table
Show/hide table
| Specifications | ||
| Description | Model | |
| TH210 | TH215 | |
| Low Idle (Engine) | 800±25 | 800±25 |
| High Idle (Engine) | 2450±25 | 2450±25 |
| Maximum Hydraulic Pump Pressure | 24000 ± 500 kPa (3481 ± 73 psi) |
24000 ± 500 kPa (3481 ± 73 psi) |
| Cracking Pressure for Relief Valve (Metering Pump) | 17500 ± 1000 kPa (2538 ± 145 psi) |
17500 ± 1000 kPa (2538 ± 145 psi) |
| Cracking Pressure for Shock Valve (Metering Pump) | 23500 ± 1000 kPa (3408 ± 145 psi) |
23500 ± 1000 kPa (3408 ± 145 psi) |
Show/hide table
| Cycle Times for Steering Functions (Seconds) Engine at low idle and the hydraulic oil temperature at 40°C±5° |
||
| Function | Model | |
| TH210 | TH215 | |
| Left Lock to Right Lock two-wheel Steer mode |
2 - 3.5 | 2 - 3.5 |
| Right Lock to Left Lock two-wheel Steer Mode |
2 - 3.5 | 2 - 3.5 |
| Left Lock to Right Lock Circle steer |
2.5 - 4 | 2.5 - 4 |
| Right Lock to Left Lock Circle steer |
2.5 - 4 | 2.5 - 4 |
| Left Lock to Right Lock Crab steer |
2.5 - 4 | 2.5 - 4 |
| Right Lock to Left Lock Crab steer |
2.5 - 4 | 2.5 - 4 |
Show/hide table
| Cycle Times for Steering Functions (Seconds) Engine at high idle and the hydraulic oil temperature at 40°C±5° |
||
| Function | Model | |
| TH210 | TH215 | |
| Left Lock to Right Lock two-wheel Steer Mode |
1.5 - 2.5 | 1.5 - 2.5 |
| Right Lock to Left Lock two-wheel Steer Mode |
1.5 - 2.5 | 1.5 - 2.5 |
| Left Lock to Right Lock Circle steer |
1.5 - 2.5 | 1.5 - 2.5 |
| Right Lock to Left Lock Circle steer |
1.5 - 2.5 | 1.5 - 2.5 |
| Left Lock to Right Lock Crab steer |
1.5 - 2.5 | 1.5 - 2.5 |
| Right Lock to Left Lock Crab steer |
1.5 - 2.5 | 1.5 - 2.5 |
Caterpillar Information System:
2004/11/29 Longer Bolts with Spacers are Now Used in Starting Motor Groups {1451}
2004/11/15 Vent Lines for the Aftercooler are Removed {1063}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic) - Assemble
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Piston Pump (Main Hydraulic) - Disassemble
Field Installation of the 239-1117 Backhoe Auxiliary Lines (KIT) (EXTENDABLE STICK){5057} Field Installation of the 239-1117 Backhoe Auxiliary Lines (KIT) (EXTENDABLE STICK){5057}
Asphalt Pavers Conveyor Electronic Control System Calibration
TH210 and TH215 Telehandlers Steering System Operational Checks
Asphalt Pavers Conveyor Electronic Control System CID 061 FMI F04
Asphalt Pavers Conveyor Electronic Control System CID 061 FMI F03
PS-360C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust
Asphalt Pavers Conveyor Electronic Control System CID 060 FMI F04
TH210 and TH215 Telehandlers Steering System Selector Valve (Steering Mode)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Stabilizer - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Steering System Relief Valve (Steering Cylinder Crossover) - Test and Adjust
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Steering System Steering Pilot System Pressure - Test
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Remove
2005/08/22 A Connector is Required When Certain Turbocharger Groups are Replaced {1052}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Steering System Pilot Valve (Steering) Supply Pressure - Test and Adjust
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Fuel Tank Water and Sediment - Drain
Asphalt Pavers Conveyor Electronic Control System Conveyor Ratio Dial - Calibrate
R1300G Load Haul Dump Machine Systems Pressure Reducing Valve (Pilot Oil) - Install
2004/11/15 The Use of Lubricant Improves Window Installation {7310}
C15 and C18 Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test