Hoe Bucket - Remove and Install
- Position the bucket, as shown.
Show/hide table
Illustration 2 g00785948 - Remove retaining clip (1).
Show/hide table
Illustration 3 g00785949 - Remove pin (2).
Show/hide table
Illustration 4 g01085159 Show/hide tableIllustration 5 g01085226 - Use a bar (3) in order to compress the spring. The compression will release linkage (5).
Note: The bucket will swing forward when the spring is compressed.
- Use the machine controls in order to remove the top linkage (6).
Show/hide table
Illustration 1 | g00785943 |
- Use the machine controls in order to secure the top linkage (6).
Show/hide table
Illustration 7 g01085605 - Extend the bucket cylinder in order to secure the bottom linkage (5).
Show/hide table
Illustration 8 g00785949 - Install pin (2).
Show/hide table
Illustration 9 g00785948 - Install retaining clip (1).
Show/hide table
Illustration 6 | g01085226 |
Caterpillar Information System:
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Compactor Wheel - Remove
AP-800D and BG-230D Asphalt Pavers Equipment Lowering with Engine Stopped
2004/06/28 Revised Special Instruction, REHS1634, "Reworking of Latching Transmission to Nonlatching Transmission" is Available {3030}
TH580B Telehandler Hydraulic System Boom Chain - Clean/Inspect/Lubricate
834H Wheel Dozer and 836H Landfill Compactor Power Train Torque Converter Stall - Test
834H Wheel Dozer and 836H Landfill Compactor Power Train Torque Converter Lockup Clutch Pressure - Test
834H Wheel Dozer and 836H Landfill Compactor Power Train Torque Converter Impeller Clutch Pressure - Test
446D Backhoe Loader Machine Systems Pump Drive - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Power Train Fill Time for the Transmission Clutch (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Power Train Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
2004/10/25 New Plates that Eliminate Interference Problems on Machines with a Grapple Bucket are Available {5498, 6704}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Compactor Wheel - Install
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Winch
PS-360C Paving Compactor Indicators and Gauges - Test
AP-800D and BG-230D Asphalt Pavers Machine Systems Machine Preparation for Troubleshooting
AP-800D and BG-230D Asphalt Pavers Hydraulic Screed Counterbalance System
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Cleaner Bar - Remove
PS-150C Pneumatic Compactor Propel System Parking Brake Release Pressure - Test
CB-334E and CB-335E Vibratory Compactors Machine Systems Front Frame and Rear Frame - Connect
PS-360C Paving Compactor Radiator and Hydraulic Oil Cooler - Clean