AP-800D and BG-230D Asphalt Pavers Caterpillar


Equipment Lowering with Engine Stopped

Usage:

AP-800D A5P
Make sure that all personnel are clear of the machine before manually lowering the screed.

  1. Open the rear access door on the operator's platform. Refer to Operation and Maintenance Manual, "Access Doors and Covers".



    Illustration 1g01085083

  1. Loosen locknut (1) .

  1. Turn screw (2) clockwise. Count the number of turns while you turn screw (2) clockwise. Turn screw (2) clockwise until the screed is lowered to the ground or until the screed is lowered onto the screed travel lock pins.

  1. Turn screw (2) counterclockwise back to the original setting.

  1. Tighten locknut (1) .

Caterpillar Information System:

2004/06/28 Revised Special Instruction, REHS1634, "Reworking of Latching Transmission to Nonlatching Transmission" is Available {3030}
TH580B Telehandler Hydraulic System Boom Chain - Clean/Inspect/Lubricate
834H Wheel Dozer and 836H Landfill Compactor Power Train Torque Converter Stall - Test
834H Wheel Dozer and 836H Landfill Compactor Power Train Torque Converter Lockup Clutch Pressure - Test
834H Wheel Dozer and 836H Landfill Compactor Power Train Torque Converter Impeller Clutch Pressure - Test
446D Backhoe Loader Machine Systems Pump Drive - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Power Train Fill Time for the Transmission Clutch (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Power Train Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
PS-150C Pneumatic Compactor Propel System Parking Brake - Test
834H Wheel Dozer and 836H Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Compactor Wheel - Remove
446D Backhoe Loader Machine Systems Hoe Bucket - Remove and Install
2004/10/25 New Plates that Eliminate Interference Problems on Machines with a Grapple Bucket are Available {5498, 6704}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Compactor Wheel - Install
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Winch
PS-360C Paving Compactor Indicators and Gauges - Test
AP-800D and BG-230D Asphalt Pavers Machine Systems Machine Preparation for Troubleshooting
AP-800D and BG-230D Asphalt Pavers Hydraulic Screed Counterbalance System
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Cleaner Bar - Remove
PS-150C Pneumatic Compactor Propel System Parking Brake Release Pressure - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.