Front Frame and Rear Frame - Connect
Connection Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-9200 | Lever Puller Hoist | 1 |
| B | 138-7575 | Link Bracket | 1 |
| C | 138-7574 | Link Bracket | 2 |
- Attach Tooling (A), Tooling (B), Tooling (C), and a suitable lifting device to the machine.
Show/hide table
 | |
| Illustration 1 | g01085149 |
- Raise the machine and remove the suitable blocks.
- Connect the front and the rear frame.
- Install bolts (40) in the articulating and oscillating hitch.
Show/hide table
 | |
| Illustration 2 | g01085160 |
- Connect steering cylinder (39) and install bolt (37) and pin assembly (38) .
Show/hide table
 | |
| Illustration 3 | g01085015 |
- Connect hose assemblies (34) and (35) .
Show/hide table
 | |
| Illustration 4 | g01084995 |
- Install propel cable (33) and bolt (30). Tighten jam nut (32) .
- Reposition throttle cable (23) and install bolts (31) .
- Install cable straps (36) .
- Connect hose assemblies (28) and (29) .
Show/hide table
 | |
| Illustration 5 | g01084990 |
- Connect hose assemblies (25), (26), and (27) .
Show/hide table
 | |
| Illustration 6 | g01084983 |
- Install throttle cable (23) and install bolt (24). Tighten jam nut (22) .
Show/hide table
 | |
| Illustration 7 | g01084969 |
- Connect hose assembly (21) .
Show/hide table
 | |
| Illustration 8 | g01084853 |
- Install clamp (19) and bolt (20) in the bracket.
Show/hide table
 | |
| Illustration 9 | g01084846 |
- Connect harness assemblies (16), (17), and (18). Install the cable straps.
Show/hide table
 | |
| Illustration 10 | g01084812 |
- Install clamp (15) .
- Connect harness assemblies (12) in headlight (14). Install headlight (14) and nut (13) .
Show/hide table
 | |
| Illustration 11 | g01084741 |
- Connect harness assembly (11). Install lamp assembly (9), and screws (7) .
Show/hide table
 | |
| Illustration 12 | g01084705 |
- Install cover (8) and screws (7) for the left lamp assembly.
Show/hide table
 | |
| Illustration 13 | g01084674 |
- Repeat Steps 18 and 19 for the other side.
- Connect harness assembly (6) and install the cable straps.
Show/hide table
 | |
| Illustration 14 | g01084668 |
- Connect harness assemblies (5) and install cable straps.
Show/hide table
 | |
| Illustration 15 | g01084667 |
- Close rear enclosure (4) .
Show/hide table
 | |
| Illustration 16 | g01084663 |
- Connect harness assemblies (2), and (3). Install cable straps.
Show/hide table
 | |
| Illustration 17 | g01085205 |
- Install bolts (1) in the console.
Show/hide table
 | |
| Illustration 18 | g01085190 |
Caterpillar Information System:
PS-150C Pneumatic Compactor Propel System Parking Brake Release Pressure - Test
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Cleaner Bar - Remove
AP-800D and BG-230D Asphalt Pavers Hydraulic Screed Counterbalance System
AP-800D and BG-230D Asphalt Pavers Machine Systems Machine Preparation for Troubleshooting
PS-360C Paving Compactor Indicators and Gauges - Test
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Winch
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Compactor Wheel - Install
2004/10/25 New Plates that Eliminate Interference Problems on Machines with a Grapple Bucket are Available {5498, 6704}
446D Backhoe Loader Machine Systems Hoe Bucket - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Compactor Wheel - Remove
PS-360C Paving Compactor Radiator and Hydraulic Oil Cooler - Clean
PS-360C Paving Compactor Cooling System Coolant Level - Check
Installing the 233-5873 Heater and Air Conditioner Kit {7304, 7320} Installing the 233-5873 Heater and Air Conditioner Kit {7304, 7320}
789C Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Cleaner Bar - Install
2004/09/20 A New Aftercooler Core is Used {1063, 1064}
AP-800D and BG-230D Asphalt Pavers Machine Systems Steering Guide
PS-150C Pneumatic Compactor Propel System Piston Pump Neutral - Test and Adjust
446D Backhoe Loader Machine Systems Backhoe Bucket Linkage - Remove and Install
AP-800D and BG-230D Asphalt Pavers Machine Systems Power Actuator (Feeder Gate)
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Work Tool System
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Mounting and Dismounting