Bank Valve - Disassemble
拆解步骤
开始:
- 拆下油箱阀。 请参考拆解和装配, "阀组 - 拆卸"。
- 将识别标记标置于阀组的所有部件上,以便于组装。
- 拆下螺母 (1) 。
Show/hide table
图 1 | g00494073 |
Show/hide table
图 2 | g00494075 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下连杆 (2) 。 分离独立阀。
- 将弹簧 (3) 、阀 (4) 和 O 形密封圈 (5) 从每个阀上拆下。
Show/hide table
图 3 | g01060231 |
Show/hide table
图 4 | g00494077 |
- 拆下螺栓 (8) 。 拆下端盖 (7) 。
Show/hide table
图 5 | g00494078 |
Show/hide table
图 6 | g00494100 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下滑阀 (6) 。
- 拆下 O 形密封圈 (9) 、弹簧 (10) 和弹簧座 (11) 。
- 拆下安全阀 (12) 。
Show/hide table
图 7 | g00494103 |
- 将盖 (16) 、螺母 (14) ,以及 O 形密封圈 (13) 和 (15) 从安全阀 (12) 上拆下。
Show/hide table
图 8 | g00494104 |
- 将杆 (17) 从安全阀 (12) 上拆下。
Show/hide table
图 9 | g00494105 |
- 将座 (18) 和弹簧 (19) 从杆 (17) 上拆下。
Show/hide table
图 10 | g00494107 |
Show/hide table
图 11 | g01060238 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将 O 形密封圈 (22) 、O 形密封圈 (20) 和备用环 (21) 从杆 (17) 上拆下。
- 将滑阀 (23) 、柱塞 (24) 和弹簧 (25) 从座 (18) 上拆下。 将 O 形密封圈 (27) 和备用环 (26) 从滑阀 (23) 上拆下。
Show/hide table
图 12 | g01060239 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将调整螺钉 (30) 、弹簧 (29) 和座 (28) 从杆 (17) 上拆下。
Show/hide table
图 13 | g01060240 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 对阀 (31) 和 (32) 进行步骤 5 至 14。 对于阀 (33) ,请参考下列步骤。
Show/hide table
图 14 | g00494111 |
- 将螺栓 (35) 和端盖 (34) 从阀 (33) 上拆下。
Show/hide table
图 15 | g00494112 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将 O 形密封圈 (36) 、护圈 (37) 、弹簧座 (38) 、弹簧 (39) 和 O 形密封圈 (40) 从端盖 (34) 上拆下。
Show/hide table
图 16 | g00494113 |
- 将螺栓 (43) 、端盖 (42) 和 O 形密封圈 (41) 从阀 (33) 上拆下。
Show/hide table
图 17 | g00494114 |
- 用螺丝起子固定滑阀 (45) 。 拆下螺栓 (44) 。
Show/hide table
图 18 | g00494115 |
Show/hide table
图 19 | g00494117 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将弹簧座 (46) 、弹簧 (47) 和隔套 (48) 从阀 (33) 上拆下。
- 将护圈 (49) 和 O 形密封圈 (50) 从阀 (33) 上拆下。 将备用环 (51) 从滑阀 (45) 上拆下。 拆下滑阀 (45) 。
Show/hide table
图 20 | g00494118 |
- 将单向阀 (52) 从阀 (33) 上拆下。
Show/hide table
图 21 | g00494119 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将提升阀 (53) 和弹簧 (54) 从阀 (33) 上拆下。 将 O 形密封圈 (56) 和备用环 (55) 从提升阀 (53) 上拆下。 将 O 形密封圈 (57) 从单向阀 (52) 上拆下。
Show/hide table
图 22 | g01060245 |
- 将安全阀 (58) 从入口壳体 (59) 上拆下。
Show/hide table
图 23 | g01060356 |
- 将 O 形密封圈 (60) 从安全阀 (58) 上拆下。 将杆 (61) 从安全阀 (58) 上拆下。
Show/hide table
图 24 | g01060246 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将座 (63) 和弹簧 (62) 从杆 (61) 上拆下。
- 将滑阀 (64) 、柱塞 (65) 和弹簧 (66) 从座 (61) 上拆下。 将 O 形密封圈 (68) 和备用环 (67) 从滑阀 (61) 上拆下。
Show/hide table
图 25 | g01060257 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将盖 (70) 、螺母 (69) ,以及 O 形密封圈 (74) 和 (75) 从杆 (63) 上拆下。 将 O 形密封圈 (73) 、O 形密封圈 (71) 和备用环 (72) 从杆 (63) 上拆下。
Show/hide table
图 26 | g01060256 |
Show/hide table
图 27 | g01060378 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将调整螺钉 (78) 、弹簧 (77) 和座 (76) 从杆 (63) 上拆下。
Caterpillar Information System:
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Control Valve (Intermittent Saw) - If Equipped
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test - CB-225E
PS-150C Pneumatic Compactor Machine System Fuel Tank
267B, 277B and 287B Multi Terrain Loaders Power Train Idler Wheel - Install - 287 Multi Terrain Loader
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
PS-150C Pneumatic Compactor Machine System Rollover Protective Structure (ROPS)
769D Off-Highway Truck and 771D Quarry Truck Safety Messages
2004/06/01 Realignment of Air System Components is Recommended. {1063}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Quick Coupler - Remove and Install
R1300G Load Haul Dump 3306 Engine Supplement Hydraulic Oil Cooler - Remove
R1300G Load Haul Dump 3306 Engine Supplement Transmission Oil Cooler - Install
R2900G Load Haul Dump Power Train Steering Frame Lock - Separate and Connect
2004/03/22 A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Assemble
Installation of Heavy Duty Brakes{3278, 4251} Installation of Heavy Duty Brakes{3278, 4251}
247B and 257B Multi Terrain Loaders Machine Systems Pump Flow - Test
2004/06/21 A New Seat Cushion and A New Location for The Seat Switch on The Paving Compactors {1616, 7312}
Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050} Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
PF-300C and PS-300C Paving Compactors Operator Controls
267B, 277B and 287B Multi Terrain Loaders Power Train Axle (Front) - Remove and Install - 287 Multi Terrain Loaders
PS-150C Pneumatic Compactor Machine System Spray Bar
Rework of the Gussets on the Body{7250, 7258} Rework of the Gussets on the Body{7250, 7258}
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Solenoid Valve and Mounting (Coupler) - Remove and Install