Idler Wheel - Install - 287 Multi Terrain Loader
Installation Procedure
- Install wheels (5) onto tube assembly (6) .
Show/hide table
Illustration 1 | g01060120 |
- Install bolts (4). Tighten bolts (4) to a torque of 95 ± 10 N·m (70 ± 7 lb ft).
- Attach a suitable lifting device to idler assembly (2). Position idler assembly (2). The weight of the idler assembly is approximately 25 kg (55 lb).
Show/hide table
Illustration 2 | g01060122 |
Show/hide table
Illustration 3 | g01060119 |
- Install brackets (3) onto both sides of the frame.
- Install bolts (1) onto both sides of the frame.
End By: Install the track. Refer to Disassembly and Assembly, "Track (Rubber) - Remove and Install".
Caterpillar Information System:
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
PS-150C Pneumatic Compactor Machine System Rollover Protective Structure (ROPS)
769D Off-Highway Truck and 771D Quarry Truck Safety Messages
2004/06/01 Realignment of Air System Components is Recommended. {1063}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Quick Coupler - Remove and Install
R1300G Load Haul Dump 3306 Engine Supplement Hydraulic Oil Cooler - Remove
R1300G Load Haul Dump 3306 Engine Supplement Transmission Oil Cooler - Install
R2900G Load Haul Dump Power Train Steering Frame Lock - Separate and Connect
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 1403 - FMI 05
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0622 - FMI 04
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0622 - FMI 03
2007/08/13 New Planetary Parts Are Used to Reduce Wear of the Thrust Disc {3160}
PS-150C Pneumatic Compactor Machine System Fuel Tank
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test - CB-225E
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Control Valve (Intermittent Saw) - If Equipped
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Disassemble
2004/03/22 A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Assemble
Installation of Heavy Duty Brakes{3278, 4251} Installation of Heavy Duty Brakes{3278, 4251}
247B and 257B Multi Terrain Loaders Machine Systems Pump Flow - Test
2004/06/21 A New Seat Cushion and A New Location for The Seat Switch on The Paving Compactors {1616, 7312}
Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050} Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
PF-300C and PS-300C Paving Compactors Operator Controls