Bank Valve - Assemble
组装步骤
- 将座 (76) 、弹簧 (77) 和调整螺钉 (78) 安装到杆 (63) 中。
注: 检查所有密封件有无损坏或磨损。 用新零件替换磨损或损坏的密封件。
Show/hide table
图 1 | g01060378 |
Show/hide table
图 2 | g01060256 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将 O 形密封圈 (71) 、备用环 (72) 和 O 形密封圈 (71) 安装到杆 (63) 上。 将 O 形密封圈 (74) 、螺母 (69) 、O 形密封圈 (75) 和盖 (70) 安装到杆 (63) 上。
- 将 O 形密封圈 (68) 和备用环 (67) 安装到滑阀 (64) 上。 将滑阀 (64) 、柱塞 (65) 和弹簧 (66) 安装到座 (61) 中。
Show/hide table
图 3 | g01060257 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将座 (61) 和弹簧 (62) 安装到杆 (63) 上。 将杆 (63) 安装到安全阀 (60) 中。 将 O 形密封圈 (60) 安装到安全阀 (60) 上。
Show/hide table
图 4 | g01060246 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将安全阀 (58) 安装到入口壳体 (59) 上。
Show/hide table
图 5 | g01060356 |
- 将 O 形密封圈 (56) 和备用环 (55) 安装到提升阀 (53) 上。 将 O 形密封圈 (57) 安装到单向阀 (52) 上。 将提升阀 (53) 、弹簧 (54) 和单向阀 (52) 安装到阀 (33) 中。
Show/hide table
图 6 | g01060245 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将滑阀 (45) 安装到阀 (33) 中。 将备用环 (51) 安装到滑阀 (45) 上。 将 O 形密封圈 (50) 和护圈 (49) 安装到阀 (33) 中。
Show/hide table
图 7 | g00494118 |
- 安装弹簧座 (46) 、弹簧 (47) 、隔套 (48) 和螺栓 (44) 。
Show/hide table
图 8 | g00494117 |
Show/hide table
图 9 | g00494115 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 安装 O 形密封圈 (41) 、端盖 (42) 和螺栓 (43) 。
Show/hide table
图 10 | g00494114 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 安装 O 形密封圈 (36) 、护圈 (37) 、弹簧座 (38) 、弹簧 (39) 、O 形密封圈 (40) 和盖 (34) 。 安装螺栓 (35) 。
Show/hide table
图 11 | g00494113 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将座 (28) 、弹簧 (29) 和调整螺钉 (30) 安装到杆 (17) 中。
Show/hide table
图 12 | g01060240 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将 O 形密封圈 (27) 和备用环 (26) 安装到滑阀 (23) 上。 将滑阀 (23) 、柱塞 (24) 和弹簧 (25) 安装到座 (18) 中。
Show/hide table
图 13 | g01060239 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将 O 形密封圈 (20) 、备用环 (21) 和 O 形密封圈 (22) 安装到杆 (17) 上。 将弹簧 (19) 和杆 (17) 安装到座 (18) 中。
Show/hide table
图 14 | g01060238 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 将杆 (17) 安装到安全阀 (12) 中。 将 O 形密封圈 (13) 、螺母 (14) 、O 形密封圈 (15) 和盖 (16) 安装到安全阀 (12) 上。
Show/hide table
图 15 | g00494105 |
Show/hide table
图 16 | g00494104 |
- 将安全阀 (12) 安装在阀组中。
Show/hide table
图 17 | g00494103 |
- 将滑阀 (6) 安装到阀中。 安装弹簧座 (11) 、弹簧 (10) 、O 形密封圈 (9) 、端盖 (7) 和螺栓 (8) 。
Show/hide table
图 18 | g00494100 |
Show/hide table
图 19 | g00494078 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 对阀 (31) 和 (32) 重复步骤 11 至 16。
Show/hide table
图 20 | g00494111 |
- 将阀 (4) 、弹簧 (3) 和 O 形密封圈 (5) 安装到每个阀中。
Show/hide table
图 21 | g00494077 |
Show/hide table
图 22 | g01060231 |
- 组装阀、入口壳体和出口壳体。 安装连杆 (2) 和螺母 (1) 。
Show/hide table
图 23 | g00494075 |
Show/hide table
图 24 | g00494073 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
End By: 安装油箱阀。 请参考 拆解和装配, "阀组 - 安装"。
Caterpillar Information System:
2004/03/22 A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Control Valve (Intermittent Saw) - If Equipped
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test - CB-225E
PS-150C Pneumatic Compactor Machine System Fuel Tank
267B, 277B and 287B Multi Terrain Loaders Power Train Idler Wheel - Install - 287 Multi Terrain Loader
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
PS-150C Pneumatic Compactor Machine System Rollover Protective Structure (ROPS)
769D Off-Highway Truck and 771D Quarry Truck Safety Messages
2004/06/01 Realignment of Air System Components is Recommended. {1063}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Quick Coupler - Remove and Install
R1300G Load Haul Dump 3306 Engine Supplement Hydraulic Oil Cooler - Remove
Installation of Heavy Duty Brakes{3278, 4251} Installation of Heavy Duty Brakes{3278, 4251}
247B and 257B Multi Terrain Loaders Machine Systems Pump Flow - Test
2004/06/21 A New Seat Cushion and A New Location for The Seat Switch on The Paving Compactors {1616, 7312}
Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050} Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
PF-300C and PS-300C Paving Compactors Operator Controls
267B, 277B and 287B Multi Terrain Loaders Power Train Axle (Front) - Remove and Install - 287 Multi Terrain Loaders
PS-150C Pneumatic Compactor Machine System Spray Bar
Rework of the Gussets on the Body{7250, 7258} Rework of the Gussets on the Body{7250, 7258}
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Solenoid Valve and Mounting (Coupler) - Remove and Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Control Valve (Intermittent Saw, 2-Bank)
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Lift Cylinder - Remove