A New Seat Cushion and A New Location for The Seat Switch on The Paving Compactors {1616, 7312}
- Paving Compactor:
- CB-214D (S/N: 1TZ1-UP)
- CB-224D (S/N: 8RZ1-UP)
- CB-225D (S/N: 9FZ1-UP)
- CB-334D (S/N: DCZ1-UP; 4CZ1-UP)
- CB-335D (S/N: BBW1-UP; 5PZ1-UP)
The location of the seat switch has been moved to the front of the seat. The new location uses the solid part of the seat base.
Use the following kits for the installation:
- Remove the four bolts at the back of the backrest in order to disassemble the existing cushion from the seat frame.
- Install the two switches in each hole in the front steel bar and the spring in the middle by using the supplied setscrew.
- Connect the harness to the switches and then connect the harness to the main harness.
- Install the rubber boots onto each switch.
- Install the seat cushion by first placing the front tabs into the plastic shell.
Caterpillar Information System:
247B and 257B Multi Terrain Loaders Machine Systems Pump Flow - Test
Installation of Heavy Duty Brakes{3278, 4251} Installation of Heavy Duty Brakes{3278, 4251}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Assemble
2004/03/22 A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Control Valve (Intermittent Saw) - If Equipped
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test - CB-225E
PS-150C Pneumatic Compactor Machine System Fuel Tank
267B, 277B and 287B Multi Terrain Loaders Power Train Idler Wheel - Install - 287 Multi Terrain Loader
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
PS-150C Pneumatic Compactor Machine System Rollover Protective Structure (ROPS)
769D Off-Highway Truck and 771D Quarry Truck Safety Messages
Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050} Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
PF-300C and PS-300C Paving Compactors Operator Controls
267B, 277B and 287B Multi Terrain Loaders Power Train Axle (Front) - Remove and Install - 287 Multi Terrain Loaders
PS-150C Pneumatic Compactor Machine System Spray Bar
Rework of the Gussets on the Body{7250, 7258} Rework of the Gussets on the Body{7250, 7258}
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Solenoid Valve and Mounting (Coupler) - Remove and Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Control Valve (Intermittent Saw, 2-Bank)
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Lift Cylinder - Remove
267B, 277B and 287B Multi Terrain Loaders Power Train Axle (Rear) - Remove and Install - 287 Multi Terrain Loaders
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Warning "Engine Coolant Level Is Low" Is Displayed - Troubleshoot