Axle (Rear) - Remove and Install - 287 Multi Terrain Loaders
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 180-3033 | Repair Stand Set | 4 |
| B | 138-7575 | Link Bracket | 2 |
| C | 6V-6146 | Load Leveling Beam | 1 |
| D | 6V-3144 | Chains | 2 |
Start By:
- Remove the undercarriage. Refer to Disassembly and Assembly, "Undercarriage - Remove".
- Use bolt (1) to fasten Tooling (B) to axle (2). Attach a suitable lifting device, Tooling (C), and Tooling (D) onto Tooling (B) .
Show/hide table
 | |
| Illustration 1 | g01060413 |
Show/hide table
 | |
| Illustration 2 | g01060415 |
- Repeat Step 1 for the other side.
- Remove bolts (3) from both sides of the machine. Remove axle (2). The weight of axle (2) is approximately 103 kg (227 lb).
Show/hide table
 | |
| Illustration 3 | g01060418 |
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 180-3033 | Repair Stand Set | 4 |
| B | 138-7575 | Link Bracket | 2 |
| C | 6V-6146 | Load Leveling Beam | 1 |
| D | 6V-3144 | Chains | 2 |
- Install Tooling (B) onto axle (2) with bolt (1) .
Show/hide table
| | |
| Illustration 4 | g01060418 |
Show/hide table
| | |
| Illustration 5 | g01060415 |
- Attach a suitable lifting device, Tooling (C), and Tooling (D) onto Tooling (B) .
- Place front axle (2) into position and install bolts (3). The weight of axle (2) is approximately 103 kg (227 lb).
- Repeat Step 3 for the other side.
- Remove bolt (1) and Tooling (B) from axle (2) .
Show/hide table
| | |
| Illustration 6 | g01060413 |
End By: Install the undercarriage. Refer to Disassembly and Assembly, "Undercarriage - Remove".
Caterpillar Information System:
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Lift Cylinder - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Control Valve (Intermittent Saw, 2-Bank)
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Solenoid Valve and Mounting (Coupler) - Remove and Install
Rework of the Gussets on the Body{7250, 7258} Rework of the Gussets on the Body{7250, 7258}
PS-150C Pneumatic Compactor Machine System Spray Bar
267B, 277B and 287B Multi Terrain Loaders Power Train Axle (Front) - Remove and Install - 287 Multi Terrain Loaders
PF-300C and PS-300C Paving Compactors Operator Controls
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050} Modification to Body Avoids Deforming of the Base Plate.{6203, 6208, 6229, 7050}
2004/06/21 A New Seat Cushion and A New Location for The Seat Switch on The Paving Compactors {1616, 7312}
247B and 257B Multi Terrain Loaders Machine Systems Pump Flow - Test
Installation of Heavy Duty Brakes{3278, 4251} Installation of Heavy Duty Brakes{3278, 4251}
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Warning "Engine Coolant Level Is Low" Is Displayed - Troubleshoot
2004/03/22 Special Instruction, REHS1797, "Installing the 233-5869 Installation Arrangement (AIR CONDITIONER, HEATER) (KIT)" Is Available {7304, 7320}
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Lift Arms - Remove
2004/03/22 Special Instruction, REHS1798, "Installing the 233-5870 Installation Arrangement (AIR CONDITIONER CONVERSION) (KIT)" Is Available {7304, 7320}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Warning "Hydraulic Oil Level Is Low" Is Displayed - Troubleshoot
2004/05/10 New Test ECM Available for Machines {0785, 7610}
267B, 277B and 287B Multi Terrain Loaders Power Train Bogie Suspension - Remove - 287 Multi Terrain Loaders
2004/04/19 A Firewall Provides a Barrier Between the Hydraulic Hoses and the Exhaust Manifold {7262, 7401}
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Disassemble
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Assemble
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Piston Motor (Generator)