Rollover Protective Structure (ROPS) - Inspect
Show/hide table
 | |
| Illustration 1 | g01045064 |
- Inspect the ROPS for loose bolts or for damaged bolts. Replace any damaged bolts or missing bolts with original equipment parts only.
Tighten the M16 bolts (1) to a torque of 165 ± 30 N·m (122 ± 22 lb ft). Tighten the M24 bolts (2) to a torque of 524 ± 100 N·m (386 ± 74 lb ft).
Note: Apply oil to all ROPS bolt threads before you install the bolts. Failure to apply oil to the bolt threads can result in improper bolt torque.
- Operate the machine on a rough surface. Replace the ROPS mounting supports if the ROPS emits a noise. Replace the ROPS mounting supports if the ROPS rattles.
Do not straighten the ROPS. Do not repair the ROPS by welding reinforcement plates to the ROPS.
Consult your Caterpillar dealer for repair of any cracks in the ROPS.
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Auxiliary Hydraulic Does Not Operate
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Pressure Switch (Brake Oil)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Hydraulic Manifold (Brake Accumulator)
446D Backhoe Loader Hydraulic and Steering System Piston Pump (Implement and Steering)
446D Backhoe Loader Radiator Core - Clean
446D Backhoe Loader Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
C27 and C32 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Position Sensor (Auxiliary)
Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100} Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0668 - FMI 02
236B2 and 252B2 Skid Steer Loaders Machine Systems Work Tool Hydraulic System
446D Backhoe Loader Tire Inflation - Check
R2900G Load Haul Dump Power Train Torque Converter Stall - Test
R2900G Load Haul Dump Power Train Transmission Pressures - Test and Adjust
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0681 - FMI 03
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0681 - FMI 05
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0681 - FMI 06
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve
Installing the 233-5869 Air Conditioner and Heater Installation Kit {7304, 7320} Installing the 233-5869 Air Conditioner and Heater Installation Kit {7304, 7320}