CID 0091 FMI 08 Throttle Position signal abnormal
产生此代码的情况:
电子控制模块（ECM）检测到不在控制工作范围内速度控制信号频率。
系统响应:
ECM 将会记录此诊断代码。 油门位置会标为无效数据。 ECM 会将发动机转速设置为已编程的低怠速。
注: 此诊断代码为激活状态时，Caterpillar 电子技师（ET）会指示油门位置为"0 ％"。
在此诊断代码为激活状态时，发动机将会保持在低怠速运转。
测试步骤 1. 进行以下的诊断步骤: 转速控制 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Position Sensor (Auxiliary)
446D Backhoe Loader Hydraulic System Oil Level - Check
2005/03/28 A New Assembly Procedure Is Available for the 769D Off-Highway Truck and the 771DQuarry Truck {1062}
Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331} Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Install
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Disassemble
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Remove
446D Backhoe Loader Hydraulic System Oil Filter - Replace
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Intermittent Engine Shutdown
446D Backhoe Loader Hydraulic System Oil - Change
446D Backhoe Loader Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
446D Backhoe Loader Radiator Core - Clean
446D Backhoe Loader Hydraulic and Steering System Piston Pump (Implement and Steering)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Hydraulic Manifold (Brake Accumulator)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Pressure Switch (Brake Oil)
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Auxiliary Hydraulic Does Not Operate
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
446D Backhoe Loader Rollover Protective Structure (ROPS) - Inspect
Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100} Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100}