914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Caterpillar


Pressure Switch (Brake Oil)

Usage:

IT14G2 ERP



Illustration 1g01045028

Operating temperature ... -40 to 121° C (-40 to 249° F)

Actuation pressure within the operating temperature range ... 5800 ± 345 kPa (850 ± 50 psi)

Minimum deactuation pressure within the operating temperature range ... 5200 ± 170 kPa (750 ± 25 psi)

When the pressure is below deactuation pressure, pole A and pole C are closed.

When the pressure is above actuation pressure, pole A and pole B are closed.

(1) Final installation torque ... 48 ± 5 N·m (35 ± 4 lb ft)

Caterpillar Information System:

914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Hydraulic Manifold (Brake Accumulator)
446D Backhoe Loader Hydraulic and Steering System Piston Pump (Implement and Steering)
446D Backhoe Loader Radiator Core - Clean
446D Backhoe Loader Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
C27 and C32 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Position Sensor (Auxiliary)
446D Backhoe Loader Hydraulic System Oil Level - Check
2005/03/28 A New Assembly Procedure Is Available for the 769D Off-Highway Truck and the 771DQuarry Truck {1062}
Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331} Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Install
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Disassemble
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Auxiliary Hydraulic Does Not Operate
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
446D Backhoe Loader Rollover Protective Structure (ROPS) - Inspect
Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100} Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0668 - FMI 02
236B2 and 252B2 Skid Steer Loaders Machine Systems Work Tool Hydraulic System
446D Backhoe Loader Tire Inflation - Check
R2900G Load Haul Dump Power Train Torque Converter Stall - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.