446D Backhoe Loader Caterpillar

Loader Bucket, Cylinder, and Linkage Bearings - Lubricate

Usage:

446D DBL

Show/hide table




Illustration 1	g00106902

Apply lubricant to the grease fitting for the upper pivot pin (1) .

Apply lubricant to the grease fittings for the lower pivot pins (2) .

Apply lubricant to the grease fitting for the rod end of the tilt cylinder (3) .

Apply lubricant to the grease fittings for the pivot bearings for the bucket tilt cylinder (4). There is a grease fitting in each linkage (four total).

Apply lubricant to the grease fitting for the pivot pin at the loader lift arm (5).

Show/hide table




Illustration 2	g01046826

Apply lubricant to the grease fitting for the rod end of the lift cylinder (6). There is a grease fitting for each side of the machine.

Apply lubricant to the grease fitting for the head end of the lift cylinder (7). There is a grease fitting for each side of the machine.

Apply lubricant to the grease fitting (8) for the frame and for the lift arm. There is a grease fitting for each side of the machine.

Caterpillar Information System:

C27 and C32 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal

420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Position Sensor (Auxiliary)

446D Backhoe Loader Hydraulic System Oil Level - Check

2005/03/28 A New Assembly Procedure Is Available for the 769D Off-Highway Truck and the 771DQuarry Truck {1062}

Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331} Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}

CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Install

CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Assemble

CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Disassemble

CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Piston Pump (Propel) - Remove

446D Backhoe Loader Hydraulic System Oil Filter - Replace

C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install

C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Intermittent Engine Shutdown

446D Backhoe Loader Radiator Core - Clean

446D Backhoe Loader Hydraulic and Steering System Piston Pump (Implement and Steering)

914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Hydraulic Manifold (Brake Accumulator)

914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Pressure Switch (Brake Oil)

420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Auxiliary Hydraulic Does Not Operate

C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove

C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install

C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble

C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble

446D Backhoe Loader Rollover Protective Structure (ROPS) - Inspect

Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100} Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100}

259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)