Water Pump - Disassemble
拆解步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 8S-2264 | 拉拔器总成 | 1 |
| 4B-3903 | 螺栓 | 2 | |
| 1P-0456 | 板 | 1 | |
| 4B-4277 | 垫圈 | 2 | |
| B | 9S-9152 | 轴承拉拔器总成 | 1 |
| C | 1P-0510 | 冲头总成 | 1 |
开始:
- 拆下水泵。 请参阅拆解和组装, "水泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 从水泵壳体 (3) 上卸下 O 形密封圈 (4) 。
Show/hide table
 | |
| 图 1 | g01045505 |
- 从进气接头 (1) 上卸下 O 形密封圈 (6) 。
- 从水泵壳体 (3) 上卸下进气接头 (1) 。 拆下 O 形密封圈 (2) 。
- 从水泵壳体 (3) 上卸下水泵滤清器 (17) 。
- 从水泵轴 (13) 上卸下螺栓 (11) 和垫圈 (9) 。
- 使用工具 (A) 将叶轮 (7) 从水泵轴 (13) 上拆下。
- 从水泵轴 (13) 上卸下螺栓 (12) 和垫圈 (10) 。
- 从水泵轴 (13) 上卸下齿轮 (5) 。
- 从水泵壳体上拆下螺栓 (18) 和护圈 (8) 。
- 从水泵壳体上卸下水泵轴 (13) 。
- 使用适当的压具和工具 (B) ，将轴承组件 (15) 从水泵轴 (13) 上拆下。
- 使用适当的压具和工具 (C) ，从水泵壳体 (3) 上卸下密封总成 (14) 。
- 使用适当的压具和工具 (C) ，从水泵壳体 (3) 上卸下唇形密封 (16) 。
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Auxiliary Hydraulic Does Not Operate
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Pressure Switch (Brake Oil)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Hydraulic Manifold (Brake Accumulator)
446D Backhoe Loader Hydraulic and Steering System Piston Pump (Implement and Steering)
446D Backhoe Loader Radiator Core - Clean
446D Backhoe Loader Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
C27 and C32 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Position Sensor (Auxiliary)
446D Backhoe Loader Hydraulic System Oil Level - Check
2005/03/28 A New Assembly Procedure Is Available for the 769D Off-Highway Truck and the 771DQuarry Truck {1062}
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
446D Backhoe Loader Rollover Protective Structure (ROPS) - Inspect
Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100} Repair Procedure for the Lower Articulation Pin on the 24H Motor Grader {7050, 7057, 7100}
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0668 - FMI 02
236B2 and 252B2 Skid Steer Loaders Machine Systems Work Tool Hydraulic System
446D Backhoe Loader Tire Inflation - Check
R2900G Load Haul Dump Power Train Torque Converter Stall - Test
R2900G Load Haul Dump Power Train Transmission Pressures - Test and Adjust
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0681 - FMI 03
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0681 - FMI 05
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0681 - FMI 06