914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Caterpillar


Solenoid Valve (Ride Control)

Usage:

IT14G2 ERP



Illustration 1g01039840

(1) Final installation torque ... 11.5 ± 0.5 N·m (100 ± 4 lb in)

(2) 3E-8583 Coil

Nominal voltage ... 24 VDC
Maximum voltage at 30 °C (85 °F) ambient temperature and 105 °C (221 °F) fluid temperature ... 28.5 VDC
Minimum voltage for actuation of the valve at 25 °C (77 °F) fluid temperature and a 20700 kPa (3000 psi) pressure drop ... 12.5 VDC
Minimum current for actuation of the valve at a 20700 kPa (3000 psi) pressure drop ... 0.9 Amp
Continuous duty with 25 °C (77 °F) ambient temperature and a stable temperature for the coil ... 42 watts
Resistance at 25° ± 5°C (77° ± 9°F) ... 13.8 ± 0.4 Ohms

Caterpillar Information System:

914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Oscillating Axle Housing (Rear)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Coupler Cylinder
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Hydraulic System Oil - Change
446D Backhoe Loader Axles, Differential and Brakes Axle Housing and Bearing Preload - Adjust
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Engine Oil Sample - Obtain
725 and 730 Articulated Trucks Braking System Solenoid Valve (Parking Brake) - Test
2003/12/29 Correction to Specifications , "STIC Control Lock" {3034}
2003/12/29 Correction to Specifications , "STIC Control Lock" {3034}
773D Off-Highway Truck and 775D Quarry Truck Refrigerant Dryer - Replace
773E Off-Highway Truck Engine Oil Sample - Obtain
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Drum Scrapers - Inspect/Adjust/Replace
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
M325D L MH and M325D MH Material Handlers Hydraulic System Cylinder (Boom, Stick and Grapple)
2003/12/15 Replacement of the Fuel Ratio Control Diaphragm {1251, 1278}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Ride Control Accumulator
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Coupler Cylinder
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
446D Backhoe Loader Axles, Differential and Brakes Axle (Front) - Adjust
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Pressure Switch (Ride Control Disable)
2003/12/01 Updating Transfer Gear Groups With New Bearings {3159}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Brake and Planetary
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Hydraulic Accumulator (Pilot Oil)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Axle Mounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.