Coupler Cylinder
Show/hide table
 | |
| Illustration 1 | g00300178 |
(1) Inside diameter of a new cylinder ... 50.8 mm (2.00 inches)
(2) Outside diameter of a new rod ... 25.4 mm (1.00 inches)
(A) When the cylinder is in the closed position the minimum distance between the pin holes should be equal to the following length. ... 340.0 mm (13.40 inches)
(B) When the cylinder is in the extended position the maximum distance between the pin holes should be equal to the following length. ... 498.0 mm (19.60 inches)
Caterpillar Information System:
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Hydraulic System Oil - Change
446D Backhoe Loader Axles, Differential and Brakes Axle Housing and Bearing Preload - Adjust
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Engine Oil Sample - Obtain
725 and 730 Articulated Trucks Braking System Solenoid Valve (Parking Brake) - Test
2003/12/29 Correction to Specifications , "STIC Control Lock" {3034}
2003/12/29 Correction to Specifications , "STIC Control Lock" {3034}
773D Off-Highway Truck and 775D Quarry Truck Refrigerant Dryer - Replace
773E Off-Highway Truck Engine Oil Sample - Obtain
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Drum Scrapers - Inspect/Adjust/Replace
914G2 and IT14G2 Compact Wheel Loaders Braking System - Test
797B Off-Highway Truck Braking System Solenoid Valve (Unloader)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Oscillating Axle Housing (Rear)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Solenoid Valve (Ride Control)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
M325D L MH and M325D MH Material Handlers Hydraulic System Cylinder (Boom, Stick and Grapple)
2003/12/15 Replacement of the Fuel Ratio Control Diaphragm {1251, 1278}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Ride Control Accumulator
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Coupler Cylinder
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
446D Backhoe Loader Axles, Differential and Brakes Axle (Front) - Adjust
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Pressure Switch (Ride Control Disable)
2003/12/01 Updating Transfer Gear Groups With New Bearings {3159}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Brake and Planetary