Pressure Switch (Ride Control Disable)
Show/hide table
Illustration 1 | g01039883 |
(1) Final installation torque for pressure switch ... 35 ± 3 N·m (26 ± 2 lb ft)
Maximum actuation pressure at -40 to 121 °C (-40 to 250 °F) ... 255 kPa (37 psi)
Deactuation pressure at -40 to 121 °C (-40 to 250 °F) ... 205 ± 20 kPa (30.0 ± 3.0 psi)
Contact position ... Normally closed below the deactuation pressure
Caterpillar Information System:
446D Backhoe Loader Axles, Differential and Brakes Axle (Front) - Adjust
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Coupler Cylinder
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Ride Control Accumulator
2003/12/15 Replacement of the Fuel Ratio Control Diaphragm {1251, 1278}
M325D L MH and M325D MH Material Handlers Hydraulic System Cylinder (Boom, Stick and Grapple)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Solenoid Valve (Ride Control)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Oscillating Axle Housing (Rear)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Coupler Cylinder
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
CP-433E, CS-423E and CS-433E Vibratory Soil Compactors Hydraulic System Oil - Change
2003/12/01 Updating Transfer Gear Groups With New Bearings {3159}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Braking System Brake and Planetary
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Hydraulic Accumulator (Pilot Oil)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Axle Mounting
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Work Tool Control
446D Backhoe Loader Axles, Differential and Brakes Differential Lock - Adjust
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Engine - Remove
SC-57 Felling Head Felling Head System Pressure - Release
Guidelines For Installing Product Link On Certain Motor Graders{7602} Guidelines For Installing Product Link On Certain Motor Graders{7602}
CB-214E, CB-224E and CB-225E Paving Compactors Braking System - Test
2003/12/15 A New Suction Tube Is Available for the Steering Pump {1359, 5057, 5070}
446D Backhoe Loader Axles, Differential and Brakes Parking Brake Control - Adjust