Brake and Planetary
152-2760 Brake and Planetary Gp
Note: The service brake is nonserviceable as a group. The service brake is part of the brake and planetary group.
Show/hide table
Illustration 1 | g01039903 |
(1) Thickness of new separator (plate) ...
(2) 128-9522 Friction Disc
- Thickness of new disc ...
7.09 ± .08 mm (0.279 ± 0.003 inch) - Minimum thickness of worn disc ...
6.11 mm (0.241 inch) - Minimum depth of oil grooves ...
0.32 mm (0.013 inch) - Minimum thickness of worn disc ...
(3) The thickness of a new piston ...
(4) 151-4009 Spring
- Assembled length ...
29.8 mm (1.17 inch) - Free length after test ...
36.5 mm (1.44 inch) - Outside diameter of coil ...
20.64 mm (0.813 inch) - Free length after test ...
Note: The openings of the spring pins (5) and (6) are 180° from each other. The openings of the spring pins (5) and (6) are parallel to the carrier.
(7) Deform pin holes slightly with a chisel. ...
Show/hide table
Illustration 2 | g06175815 |
Typical example |
Show/hide table
Specification for 385-3636 Service Brake Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 3 | 385-3638 Bolt | Before assembly, apply red Loctite 263 to the threads.
Torque to |
2 | 1 | 127-0465 Plug | Before assembly, apply red Loctite 263 to the threads.
Torque to |
3 | 1 | 385-3641 Bolt | Before assembly, apply red Loctite 263 to the threads.
Torque to |
4 | 4 | 385-3637 Disc | Thickness of new disc Minimum thickness of worn disc |
Caterpillar Information System:
2003/12/01 Updating Transfer Gear Groups With New Bearings {3159}
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Pressure Switch (Ride Control Disable)
446D Backhoe Loader Axles, Differential and Brakes Axle (Front) - Adjust
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Coupler Cylinder
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Ride Control Accumulator
2003/12/15 Replacement of the Fuel Ratio Control Diaphragm {1251, 1278}
M325D L MH and M325D MH Material Handlers Hydraulic System Cylinder (Boom, Stick and Grapple)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Solenoid Valve (Ride Control)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Oscillating Axle Housing (Rear)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Coupler Cylinder
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Hydraulic Accumulator (Pilot Oil)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Machine Systems Axle Mounting
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Hydraulic System Work Tool Control
446D Backhoe Loader Axles, Differential and Brakes Differential Lock - Adjust
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Engine Supplement Engine - Remove
SC-57 Felling Head Felling Head System Pressure - Release
Guidelines For Installing Product Link On Certain Motor Graders{7602} Guidelines For Installing Product Link On Certain Motor Graders{7602}
CB-214E, CB-224E and CB-225E Paving Compactors Braking System - Test
2003/12/15 A New Suction Tube Is Available for the Steering Pump {1359, 5057, 5070}
446D Backhoe Loader Axles, Differential and Brakes Parking Brake Control - Adjust
HF181, HF201 and HF221 Felling Heads Felling Head Grapple Arm - Install
773E Off-Highway Truck/Tractor and 775E Quarry Truck Sound Information and Vibration Information